Related procedures for installing and removing adapters

Find procedures that are related to installing and removing adapters.

Avoiding electric shock
Find information about precautions you should take to avoid electric shock when working on our around a computer system.
Handling static-sensitive devices
Find information about precautions you must take to prevent damage to electronic components from static electricity discharge.
Updating the worldwide port name for a new 5735 IOA
If you exchange a 5735 Fibre Channel input/output adapter (IOA), the IBM external storage subsystem must be updated to use the worldwide port name (WWPN) of the new 5735 IOA. Any SAN hardware that uses the WWPN zoning might also need updating.
Removing and replacing the tailstock on an adapter
Find information about removing and replacing the tailstock on an adapter. You can replace the tailstock on an adapter if the adapter has a different tailstock.
Hot-plug manager access for AIX
Find information about how to service adapters with the system power on in AIX®.
Installing the AIX device driver software
Find information about how to install the AIX device driver software for a PCIe adapter.
Installing or replacing an adapter with the system power turned on in a Virtual I/O Server
Find information about how to install or replace an adapter in the Virtual I/O Server logical partition.
Verifying that the hot-plug adapter tools are installed for the Linux operating system
Find information about how to verify that the hot-plug adapter tools are installed on your Linux® system so you can then verify the adapter is installed.
Checking the amount of remaining life in NVMe devices
Learn how to use operating system commands to find the amount of remaining life in an NVMe device.

Parent topic: Installing, removing, and replacing adapters in the 9040-MR9 system

Last updated: Wed, June 07, 2023