Enabling enclosure indicators

Find out how to display and change Field Replaceable Unit (FRU) indicators within each enclosure.

You can turn on or off the identify indicators in each enclosure. An enclosure is a group of indicators. For example, a processing unit enclosure represents all of the indicators within the processing unit and an I/O enclosure represents all of the indicators within that I/O enclosure. Enclosures are listed by their location code.

To perform this operation, you must have one of the following authority levels:
  • Administrator
  • Authorized service provider

To enable the enclosure indicator states, do the following steps:

  1. On the ASMI Welcome pane, specify your user ID and password, and click Log In.
  2. In the navigation area, expand System Configuration and Service Indicators.
  3. Select Enclosure Indicators.
  4. Select the enclosure of choice and click Continue.
  5. Make the necessary changes to the selection list located next to each location code.
  6. To save the changes made to the state of one or more FRU indicators, click Save settings.

    To turn off all of the indicators for this enclosure, click Turn off all. A report page is displayed indicating success or failure.

Parent topic: Changing service indicators


Last updated: Tue, September 18, 2018