Removing and replacing the I/O backplane in the 8408-44E or 8408-E8E

Learn how to remove and replace an I/O backplane in the 8408-44E or 8408-E8E server.

If your system is managed by the Hardware Management Console (HMC), use the HMC to repair a part in the system. For instructions, see Repairing a part by using the HMC.

  1. Preparing the system to remove and replace the I/O backplane
    To prepare the system to remove and replace the I/O backplane, complete the steps in this procedure.
  2. Removing the I/O backplane from the 8408-44E or 8408-E8E
    To remove the I/O backplane, complete the steps in this procedure.
  3. Replacing the I/O backplane in the 8408-44E or 8408-E8E
    To replace the I/O backplane, complete the steps in this procedure.
  4. Preparing the system for operation after removing and replacing the I/O backplane
    To prepare the system for operation after removing and replacing the I/O backplane, complete the steps in this procedure.
Parent topic: I/O backplane for the 8408-44E or 8408-E8E


Last updated: Mon, August 22, 2016