Removing and replacing the system backplane in the 8408-44E or 8408-E8E

Learn how to remove and replace a system backplane in the 8408-44E or 8408-E8E server.

If your system is managed by the Hardware Management Console (HMC), use the HMC to repair a part in the system. For instructions, see Repairing a part by using the HMC.

  1. Preparing the system to remove and replace the system backplane
    To prepare the system to remove and replace the system backplane, complete the steps in this procedure.
  2. Removing the system backplane from the 8408-44E or 8408-E8E
    To remove the system backplane, complete the steps in this procedure.
  3. Replacing the system backplane in the 8408-44E or 8408-E8E
    To replace the system backplane, complete the steps in this procedure.
  4. Preparing the system for operation after removing and replacing the system backplane
    To prepare the system for operation after removing and replacing the system backplane, complete the steps in this procedure.
Parent topic: System backplane for the 8408-44E or 8408-E8E


Last updated: Tue, November 27, 2018