Removing and replacing the base function system backplane in the 8247-42L, 8286-41A, or 8286-42A

Learn how to remove and replace a base function system backplane.

If your system is managed by the Hardware Management Console (HMC), use the HMC to repair a part in the system. For instructions, see Repairing a part by using the HMC.

If your system is not managed by an HMC, complete the following steps to remove and replace a base function system backplane:
Note: Replacing this field-replaceable unit (FRU) must be completed by an authorized service representative.
  1. Preparing the system to remove and replace the base function system backplane
    Use this procedure to prepare the system to remove and replace the base function system backplane.
  2. Removing the base function system backplane from the 8247-42L, 8286-41A, or 8286-42A
    Learn how to remove the base function system backplane from a server to replace a failing part or as part of another service procedure.
  3. Replacing the base function system backplane in the 8247-42L, 8286-41A, or 8286-42A
    Learn how to replace the base function system backplane.
  4. Preparing the system for operation after removing and replacing the base function system backplane
    Use this procedure to prepare the system for operation after removing and replacing the base function system backplane.
Parent topic: System backplane for the 8247-42L, 8286-41A, or 8286-42A


Last updated: Tue, November 27, 2018