Product Documentation
Abstract
The following table lists the firmware and software versions that are supported in IBM® PureApplication™ System W1500 Version 1.0.0.4.
Content
|
Component | Version |
| IBM RackSwitch™ G8264 | 7.4.2.0 |
| IBM Flex System EN4093 10Gb Ethernet Scalable Switch | 7.5.2 |
| IBM Flex System FC5022 16Gb SAN Scalable Switch | v7.0.0_pha3 |
| IBM Storwize® V7000 | 6.4.1.2 or 6.4.1.3 (see note) |
| Chassis Management Module (CMM) | 2PET10M, 2PET10P, or 2PET10Q (see note) |
| EN4054 10Gb Ethernet mezzanine card | 4.4.180.3 |
| FC3172 8Gb Fibre Channel mezzanine card | 5.07.02 |
| Unified Extensible Firmware Reference (UEFI) | 122BUS |
| IBM Dynamic System Analysis (DSA) | AB6 (DSYTAB6) |
| Integrated management module (IMM) | 40E (1AOO40E) |
| Flexible Service Processor (FSP) in IBM Flex System p460 Compute Node | AF763_050 |
| IBM UpdateXpress System Pack Installer | 9.30 |
| LSI 2004 SAS Controller | 1.10.09 |
| SAS / SATA Hard Disk Drive Update Program | 1.12 |
Note: The firmware versions installed on Chassis Management Modules (CMM) or V7000 controllers will vary based upon the manufacture date of the system. Each version is supported. When replacing a CMM or a V7000, ensure that the module being installed uses the same firmware version as the remaining devices in the system. All devices in the system must use the same firmware version.
For information about other versions, see Supported firmware and software in PureApplication System.
[{"Product":{"code":"SSM8NY","label":"PureApplication System"},"Business Unit":{"code":"BU053","label":"Cloud & Data Platform"},"Component":"MT 8283","Platform":[{"code":"PF016","label":"Linux"}],"Version":"1.0.0.4","Edition":"","Line of Business":{"code":"","label":""}}]
Was this topic helpful?
Document Information
Modified date:
17 June 2018
UID
swg27038144