Download
Abstract
This document lists the fixes contained in IBM PureApplication System Version 2.1.2.0.
Download Description
The following tables contain the Authorized Program Analysis Reports (APARs) and other fixes that are included in this release. If an integrated pattern or component is not listed, there were no fixes for that pattern or component in this version.
System APARs
APAR | Abstract |
PureApplication System: "Invalid value" error raised for user-initiated script package script key values at deploy | |
PureApplication System: Upgrade to IBM Storwize V7000 firmware to at least version 7.4.0.4 | |
PureApplication System: Update the IBM Virtual I/O Server (VIOS) level support for Power Systems to version 2.2.3.50 | |
PureApplication System: Issue with access rights on the pattern builder | |
PureApplication System: Ensure the system response source IP address is the floating IP address | |
PureApplication System: Upgrade from PureApplication System Version 2.1 interim fix 1 to interim fix 2 does not complete | |
PureApplication System: Unable to delete a virtual system pattern deployed prior to a system upgrade to version 2.1 | |
PureApplication System: An emergency fix deletion should include the associated expanded directories and contents | |
PureApplication System: Unable to deploy Monitoring shared service to second system in a multi-system configuration | |
'CWZKS6417E: [ID] is missing plug-in CHEFCLIENT:1.0.1.0 with signature XXXXX' when deploying a pattern with the Chef client | |
PureApplication System: Add a visual indicator on the part to indicate the design of the product. | |
PureApplication System allows Installation Manager content to be imported as an emergency fix | |
Non-admin user cannot add cloud group to environment profile without Workload administration manage authority | |
PureApplication System: Failure to deploy a pattern with a newly created software component in the pattern builder | |
Deployment fails while the image is getting copied to second PureApplication System in a multi-system configuration | |
PureApplication System: Capturing a virtual machine failed when a block storage is attached | |
Importing a pattern using the command line interface will fail on non-English operating system platforms | |
PureApplication System: Extending a cloned image with an additional NIC is not supported | |
PureApplication System: Handle the error case where serial number information is not available for a compute node | |
PureApplication System: Need to indicate that LDAP group members are not displayed in the system console | |
PureApplication System: Using a non-administrator user may have slower response time when accessing console resources | |
Executing script packages fails with error status code 500 after upgrading to Version 2.1.1.0 of PureApplication System | |
PureApplication System: Unable to accept license due to error CWZIPL0183X: Error invoking IAAS when registering license | |
The pre-upgrade checking process did not identify a hardware error which affected the PureApplication System upgrade | |
PureApplication System: Call Home check for duplication problems is not working | |
PureApplication System users are unable to delete workload instance | |
PureApplication System: High availability on Power compute nodes fails to migrate all virtual machines from failing compute node | |
PureApplication System: Virtual machines cannot be stopped on cloud group with high availability status inactive | |
A failed virtual machine snapshot in a virtual system can cause other virtual machine snapshots to not be removed | |
Virtual system name is populated with the instance ID when deploying with deployer provided IP address | |
PureApplication System: Virtual machine console link and the RESETMKSIPS REST API does not work | |
PureApplication System: IBM Business Process Manager cumulative fix information is missing in the maintenance view | |
PureApplication System: Deployments that require user to upload an artifact at deploy time have the name encoded twice | |
PureApplication System: Incomplete collection set on components on Intel based systems | |
PureApplication System: A problem record with a collection set but without a service ticket should not have an upload option | |
PureApplication System: "Failed to delete snapshot" error prevents a virtual system delete operation | |
PureApplication System: New problems created on the system are always opened as a severity 3 | |
PureApplication System: Call Home loops creating new problem tickets in the IBM Problem Management System | |
PureApplication System: PowerVC errors thrown if compute node is simultaneously source and target of virtual machine migrations | |
PureApplication System: Database rule sets perpetually in loading state | |
PureApplication System: PowerVC K2 errors can cause a virtual machine to be placed in error state | |
PureApplication System: Adding a compute node to high availability cloud group always displays a popup message | |
PureApplication System: Deleting a source image that has a fixpack applied prevents cloned images from being processed | |
PureApplication System: Image is out of synchronization after copying from one system to another in a multi-system configuration | |
PureApplication System: Cloning operation failed due to error CWZIP8706E | |
PureApplication System: Virtual appliance row can show up more than once in the virtual machine name information screen | |
Valid domain names are not recognized correctly in the System Settings > Cloud Management IP section during setup | |
Script details page is not displayed for users which do not have the appropriate access rights on patterns | |
PureApplication System: Untranslated message identifier "RM07370" displayed in the virtual system instances page | |
PureApplication System: Error updating deployment status after multi-system network or power outage | |
PureApplication System: A running virtual system pattern prevents quiesced compute nodes from being initialized | |
PureApplication System: System restore failed with "CWZIP9605E Configuration of PowerVC failed" | |
PureApplication System: GPFS node volume attach fails with "Incompatible Device" error | |
PureApplication System: Log collection set left in incomplete state | |
PureApplication System: Unable to replace an active SSL certificate file on the PureSystems Manager | |
PureApplication System: "CMPRE0001E: An internal server error occurred." after a virtual system pattern snapshot restore | |
PureApplication System: Copying an image in a multi-system configuration can fail without a displayed error | |
PureApplication System: Multi-system copy and synchronize button should be disable for draft copy of an image | |
PureApplication System: Cannot register a component license if the part number is an empty array | |
PureApplication System: Unknown error can occur if more than 1000 images are imported into the system | |
PureApplication System: Metadata error message displays on the pattern buidler after adding script package and saving | |
PureApplication System: Pattern engine behaves erratically when over 32000 sessions occur in a 24 hour period | |
PureApplication System: Improve high availability of generation 2 hardware power systems |
APAR | Abstract |
PureApplication Software The reported public IP address is incorrect when a public Network Interface Card (NIC) is used | |
Collection set marked as "Incomplete" - Error: Cannot access PSM information from database, unable to check status | |
PureApplication Software: Creating a system log collection set results in an incomplete set | |
PureApplication Software: The discover operation causes deployed virtual machine status to change to "Unavailable" |
APAR | Abstract |
PureApplication System: Failure to upload content to the installation manager repository does not display an error | |
PureApplication Software: Virtual system instances goes in 'Error" after restart | |
PureApplication System: Installing a fix causes all listed fixes to be installed on the virtual system | |
Cannot use string as value of "Timeout" in cbscript.json in the new architecture virtual system pattern | |
When PureApplication system was upgraded to 2.1.1.0 Connect In/Out field outbound server(s) and port(s) disappeared | |
PureApplication System: STOPWAS.SH "Bad substitution" error when applying a fix pack | |
Virtual system with external Installation Manager repository defined fails to complete deployment, has SAVECREDENTIAL error | |
PureApplication System: Instance status of "Not Ready" and script package failures after a system pattern upgrade | |
PureApplication System: CPU scaling policy failing on the IBM OS Image for Red Hat Linux systems | |
PureApplication System: An intermittent problem in the script utilities results in a virtual system pattern error state | |
PureApplication System: Maintenance pre and post upgrade scripts are executed for fixes that have already been applied |
APAR | Abstract |
PureApplication System: The monitoring ITCAM data collector could not be configured correctly | |
PureApplication System: Single sign-on fails, system monitoring presents a login prompt | |
PureApplication System: WebSphere Application Server is not restarted after monitoring data collector configuration | |
PureApplication System: Virtual machine stuck in 'Not Ready' state due to system monitoring error after upgrade to 2.1.1.0 | |
PureApplication System: Monitoring start operation fails and virtual machine goes into error state. |
APAR | Abstract |
PureApplication System: Clients are unable to re-register after upgrading the IBM Endpoint Manager Service |
APAR | Abstract |
PureApplication System: GPFS error in MMSETQUOTA: Could not get ID of fileset 'Webserver error (52) 'Invalid Exchange' | |
PureApplication System: Users may not be able to deploy a pattern which has more than 4 clients connected to GPFS | |
PureApplication System: Restarting a virtual system that is using GPFS fails due to an unmounted GPFS file system | |
PureApplication System: PRINTERROR 'Method not found' during GPFS client operations error condition | |
PureApplication System: GPFS pattern type has multiple snapshot issues during restart, failover, and takover | |
PureApplication System: GPFS pattern removes the N character from the end of a nodename |
APAR | Abstract |
Duplicate alerts from Database Performance Monitoring |
APAR | Abstract |
PureApplication System: Large number of "CWZIP1807W No route to host" messages are seen in the events logs |
APAR | Abstract |
IBM Pattern Development Kit: Shared Service 'Index out of range' error | |
IBM Workload Plug-in Development Kit: The source page and the design page are not synchronized | |
PureApplication System: The IBM Workload Plug-in Development Kit needs to validate software component identifiers |
APAR | Abstract |
Syntax error in ETC/NTP.CONF on virtual machines deployed on PureApplication System |
Problems (APARS) fixed
Was this topic helpful?
Document Information
Modified date:
15 June 2018
UID
swg24041499