Preventive Service Planning
Abstract
Configuration information for BDT MultiStor, Fujitsu ETERNUS LT140 and Overland-Tandberg NEO XL40
Content
BDT MultiStor
Fujitsu ETERNUS LT140
Overland-Tandberg NEO XL40
Model
|
Drive Addresses
|
Storage Slot Addresses
|
Changer Address
|
Entry/Exit Slot Address
|
Base
|
1-3 HH
|
1001-1032
|
0
|
101-104
|
Notes:
- Tape Library configurations for base model and with 6 expansion modules:
- 3 Half-Height (HH) LTO drives per base module
- 21 HH LTO drives per full stack
- 40 slots per base module, 280 slots per full stack
- 5 mailslots per base module, 35 mailslots per full stack
- Barcodes are required.
- Eight character barcodes are required. The last 2 characters must be the media identifier "L#" where # is the tape cartridge generation. For example, ABC456L8 for an LTO-8 cartridge. Without a proper barcode label, a volume will appear as "unknown media".
- ELEMent=AUTODetect in the DEFINE/UPDATE DRIVE command is supported.
- BDT MultiStor is supported by IBM Spectrum Protect Sever version 8.1.4 or later.
- Support for IBM Ultrium 7 support requires IBM Spectrum Protect Server 7.1.3 or later
- Support for IBM Ultrium 8 support requires IBM Spectrum Protect Server 8.1.4 or later
- Support for IBM Ultrium 9 support requires IBM Spectrum Protect Server 8.1.14.100 or later
- Mixed generation LTO (drive & media) is supported.
- BDT MultiStor library is available with the following drives:
- IBM ULTRIUM-HH9 (firmware NCA1 or newer)
- IBM ULTRIUM-HH8 (firmware HB81 or newer)
- IBM ULTRIUM-HH7 (firmware HB81 or newer)
- IBM ULTRIUM-HH6 (firmware H991 or newer)
- Fujitsu ETERNUS LT140 library is available with the following drives:
- IBM ULTRIUM-HH9 (firmware NCA1 or newer)
- IBM ULTRIUM-HH8 (firmware JAY1 or newer)
- IBM ULTRIUM-HH7 (firmware JAY1 or newer)
- IBM ULTRIUM-HH6 (firmware JAY1 or newer)
- Overland Storage NEO XL40 library is available with the following drives:
- IBM ULTRIUM-HH9 (firmware NCA1 or newer)
- IBM ULTRIUM-HH8 (firmware JAY1 or newer)
- IBM ULTRIUM-HH7 (firmware JAY1 or newer)
- Device identifications and firmware levels used during validation
- (Validated with IBM Spectrum Protect 8.1.4.00)
- Library ID : BDT MULTISTAK --- Firmware: 1.00
- Drive ID : IBM ULTRIUM-HH8 --- SAS Firmware: HB81
- Drive ID : IBM ULTRIUM-HH7 --- SAS Firmware: HB81
- Drive ID : IBM ULTRIUM-HH6 --- SAS Firmware: H991
- (Validated with IBM Spectrum Protect 8.1.4.00)
- Library ID : BDT MULTISTAK --- Firmware: 1.00
- Drive ID : IBM ULTRIUM-HH8 --- FC Firmware: HB81
- Drive ID : IBM ULTRIUM-HH7 --- FC Firmware: HB81
- Drive ID : IBM ULTRIUM-HH6 --- FC Firmware: H991
- (Validated with IBM Spectrum Protect 8.1.7.00)
- Library ID : FUJITSU ETERNUS LT260 --- Firmware: 1.00
- Drive ID : IBM ULTRIUM-HH8 --- SAS Firmware: JAY1
- Drive ID : IBM ULTRIUM-HH7 --- SAS Firmware: JAY1
- Drive ID : IBM ULTRIUM-HH6 --- SAS Firmware: JAY1
- (Validated with IBM Spectrum Protect 8.1.7.00)
- Drive ID : IBM ULTRIUM-HH8 --- FC Firmware: JAY1
- Drive ID : IBM ULTRIUM-HH7 --- FC Firmware: JAY1
- Drive ID : IBM ULTRIUM-HH6 --- FC Firmware: JAY1
- (Validated with IBM Spectrum Protect 8.1.7.00)
- Library ID : BDT MULTISTAK --- Firmware: 1.20
- Drive ID : IBM ULTRIUM-HH8 --- SAS Firmware: JAY1
- Drive ID : IBM ULTRIUM-HH7 --- SAS Firmware: JAY1
- (Validated with IBM Spectrum Protect 8.1.7.00)
- Drive ID : IBM ULTRIUM-HH8 --- FC Firmware: JAY1
- Drive ID : IBM ULTRIUM-HH7 --- FC Firmware: JAY1
- (Validated with IBM Spectrum Protect 8.1.14.100)
- Library ID : BDT MULTISTAK --- Firmware: 1.40
- Drive ID : IBM ULTRIUM-HH9 --- Firmware: NCA1
- Drive ID : IBM ULTRIUM-HH8 --- Firmware: N9M1
- The IBM device driver is required for IBM Ultrium drives. IBM device drivers are available at IBM Fix Central. Choose the following options from the drop-down menus.
- Product Group -> System Storage
- System Storage -> Tape systems
- Tape systems -> Tape drivers and software
- Tape drivers and software -> Tape device drivers
- Platform -> Select the platform for the device driver
- See Technote 1396706 for information on platforms on which SAS devices are supported.
[{"Product":{"code":"SSEQVQ","label":"IBM Spectrum Protect"},"Business Unit":{"code":"BU058","label":"IBM Infrastructure w\/TPS"},"Component":"Server","Platform":[{"code":"PF002","label":"AIX"},{"code":"PF016","label":"Linux"},{"code":"PF033","label":"Windows"}],"Version":"8.1.4","Edition":"All Editions","Line of Business":{"code":"LOB26","label":"Storage"}}]
Was this topic helpful?
Document Information
Modified date:
06 June 2022
UID
swg22015722