Preventive Service Planning
Abstract
This document details the Hardware and Software requirements for Tivoli Storage Manager for Virtual Environments: Data Protection for VMware 6.4.1
Content
Note: IBM Tivoli Storage Manager for Virtual Environments 6.4 will reach End-Of-Support (EOS) on September 30, 2017. There will be no support extensions for IBM Tivoli Storage Manager Version 6.4 products. Customers are encouraged to upgrade to a current product release that has not yet reached end of support. See in TSM Family Products with Support Extension contracts available which releases are supported or which are the recommendations for replacement.
The Data Protection for VMware requirements vary by high level functional component. Data Protection for VMware has the following high level functional components:
- Data Protection for VMware GUI
- Data Mover
- Recovery Agent
Note:
All Data Protection for VMware functional components must be at the same Fix Pack level. Within a given fix pack level, the interim fix level can differ.
Examples:
- When upgrading the Data Protection for VMware GUI from 6.4.0 to 6.4.1, all data movers and recovery agents must be upgraded to 6.4.1.
- When upgrading a data mover from 6.4.1.3 to 6.4.1.4, it is not required that all other components be upgraded to 6.4.1.4 (but they all must be at 6.4.1.x).
This document is divided into linked sections for ease of navigation. You may use the links below to jump to the desired section of the document.
Supported VMware vCenter Server versions
Data Protection for VMware GUI supported operating systems
Data Mover supported operating systems
Recovery Agent & Recovery Agent Command Line Interface supported operating systems
Additional software requirements and limitations
Hardware requirements for Data Protection for VMware
Where to download Tivoli Storage Manager for Virtual Environments 6.4.1
Hardware and Software requirements for other releases of Data Protection for VMware
Supported VMware vCenter Server versions
The following VMware vCenter Server versions are supported:
- vCenter Server 5.0
- vCenter Server 5.1
No update or patch is available for this issue at this time for ESXi 4.x hosts. Check the VMware KB for updates.
Note: 05/27/2014 As per APAR IT01979:
it indicated that the vCenter Server 4.1 was supported. However, vCenter 4.1 is not supported with the 6.4.1 and newer interim fixes and fix packs. This is due to a limitation associated with the VMware VDDK included in the Tivoli Storage Manager (TSM) Backup-Archive Client. The TSM Backup-Archive Client is separately installed prerequisite software which enables the Data Protection for VMware Data Mover functions.
Data Protection for VMware GUI supported operating systems
This functional component integrates the product with the VMware vCenter Server client in order to back up, restore, and manage virtual machines in the VMware vCenter and includes the Data Protection for VMware command-line interface.
Attention: Connection to the vCenter Server is required to install the Data Protection for VMware vSphere GUI. If your vCenter Server uses an RSA key with an encryption length greater than 2048 bits, then before installing the Data Protection for VMware vSphere GUI, you must download and install the unrestricted JCE policy files. The instructions are in technote: Installing the Data Protection for VMware GUI: Download unrestricted SDK JCE files. You do not need to install these files if your RSA key encryption length is 2048 bits or less.
The supported operating systems by platform are detailed below.
Linux x86_64 platform
The following operating systems are supported for the Data Protection for VMware GUI on the Linux x86_64 platform.
- Red Hat Enterprise (RHEL) Linux 5 Update 6, and later mod levels and fix packs: Desktop and Advanced Platform Editions
- Red Hat Enterprise (RHEL) Linux 6, and later mod levels and fix packs: Sever Editions
- SUSE Enterprise Linux 11, and later mod levels and fix packs: Sever Editions
Note: 05/27/2014 As per APAR IT01979:
- the minimum level of Red Hat Enterprise (RHEL) Linux 5 was listed as Update 2.
However, the minimum supported level is actually Update 6. - the Red Hat Enterprise (RHEL) Linux 6 support statement indicated that the following editions are supported: Desktop and Advanced Platform Editions.
However, only the following editions are actually supported: Server Editions - the SUSE Enterprise Linux 11 support statement indicated that the following editions are supported: Desktop and Advanced Platform Editions
However, only the following editions are actually supported: Server Editions
Windows x86 platform
The following operating systems are supported for the Data Protection for VMware GUI on the Windows x86 platform:
- Windows Server 2008, and later Service Packs: Standard, Enterprise, Datacenter Editions
- Windows 7, and later Service Packs: Enterprise, Professional, and Ultimate Editions
- Windows 8: Professional, Standard, and Enterprise Editions
Note: 05/27/2014 As per APAR IT01979:
- the Windows Server 2008 support statement indicated that the following editions are supported:Standard, Enterprise, Datacenter, Storage Server, Storage Server R2, Small Business Server, Essential Business Server, and Web Editions
However, only the following editions are actually supported: Standard, Enterprise, Datacenter Editions - the Windows 8 support statement indicated that the following editions are supported: Professional and Enterprise Editions
However, the following editions are actually supported: Professional, Standard, and Enterprise Editions
Windows x64 platform
The following operating systems are supported for the Data Protection for VMware GUI on the Windows x64 platform:
- Windows Server 2008, and later Service Packs: Standard, Enterprise, Datacenter Editions
- Windows Server 2008 R2, and later Service Packs: Standard, Enterprise, Datacenter Editions
- Windows 7, and later Service Packs: Enterprise, Professional, and Ultimate Editions
- Windows 8: Professional, Standard and Enterprise Editions
- Windows Server 2012: Essentials, Standard, and Datacenter Editions
Note: 05/27/2014 As per APAR IT01979:
- the Windows Server 2008 support statement indicated that the following editions are supported: Standard, Enterprise, Datacenter, Storage Server, Storage Server R2, Small Business Server, Essential Business Server, and Web Editions
However, only the following editions are actually supported: Standard, Enterprise, Datacenter Editions - the Windows Server 2008 R2, support statement indicated that the following editions are supported: Standard, Enterprise, Datacenter, Storage Server, Storage Server R2, Small Business Server, Essential Business Server, and Web Editions
However, only the following editions are actually supported: Standard, Enterprise, Datacenter Editions - the Windows 8 support statement indicated that the following editions are supported: Professional and Enterprise Editions
However, the following editions are actually supported: Professional, Standard, and Enterprise Editions
Data Mover supported operating systems
The Data Mover is installed on the vStorage Backup Server and enables off-host block level incremental backups. This function is enabled by the installation of the Tivoli Storage Manager (TSM) Backup-Archive Client 6.4.1, or later maintenance levels and Fix Packs. The TSM Backup-Archive Client is a separate prerequisite and not included in the Data Protection for VMware installation package.
Though the TSM Backup-Archive Client supports a wide variety of operating systems, only a subset of those operating systems are supported with TSM for Virtual Environments.
- The 6.4.1 level of the TSM Backup-Archive client, or later Fix Packs or Interim fixes of this release, is required with Data Protection for VMware 6.4.1.
WARNING:
The TSM Client API 6.4.1 is also a prerequisite of Data Protection for VMware 6.4.1 and is automatically installed as a part of the Data Protection for VMware 6.4.1 installation process. The TSM Backup-Archive Client and TSM Client API levels must remain in sync in your complete environment. Therefore, future updates to either the TSM Backup-Archive Client or the TSM Client API require that the other component be updated at the same time. I.e. if you install a new Fix Pack level of the TSM Backup-Archive client, you need to upgrade the TSM Client API to the exact same level on your Data Protection for VMware systems and vice versa. See also "Upgrading to Tivoli Storage Manager for Virtual Environments Version 6.4.1"
The VMware Virtual Disk Development Kit (VDDK) version 5.1.1 runtime files are used for backing up virtual machines by the Data Mover.
Data Mover / TSM Backup-Archive Client with Data Protection for VMware supports the operating systems listed below, as long as they are also supported by VDDK version 5.1.1.
For updates on supported OSes, known issues and limitations regarding VDDK 5.1.1 see the VMware web site.
The Data Protection for VMware data mover utilizes VMware's Virtual Disk Development Kit (VDDK) API's to open, close, read and write virtual disk data (VMDKs). To determine the level of VDDK used in each level of Data Protection for VMware, as well as compatible ESX/ESXi builds supported by the VDDK level, please refer to the tech note:
- Tivoli Storage Manager for Virtual Environments: Data Protection for VMware data mover compatibility guide with VMware's Virtual Disk Development Kit
The supported operating systems by platform for the Data Mover / TSM Backup-Archive Client with Data Protection for VMware are detailed below.
Linux x86_64 platform
The following operating systems are supported for the Data Mover on the Linux x86_64 platform:
- Red Hat Enterprise (RHEL) Linux 6 Update 1 and Update 2: Desktop and Advanced Platform Editions
- SUSE Enterprise Linux 11 SP2: Desktop and Server Editions
Windows x64 platform
The following operating systems are supported for the Data Mover on the Windows x64 platform:
- Windows Server 2008 R2, and later Service Packs: Standard, Enterprise, Datacenter, Storage Server, Storage Server R2, Small Business Server, Essential Business Server, and Web Editions
- Windows Server 2012 Essentials, Standard, and Datacenter Editions
Recovery Agent supported operating systems
This function provides virtual mount and instant restore capabilities. The supported operating systems by platform are detailed below.
Linux x86_64 Platform
The following operating systems are supported for the Recovery Agent on the Linux x86_64 platform:
- Red Hat Enterprise (RHEL) Linux 51 Update 2, and later mod levels and fix packs: Desktop and Advanced Platform Editions
- Red Hat Enterprise (RHEL) Linux 61, and later mod levels and fix packs: Desktop and Advanced Platform Editions
- SUSE Enterprise Linux 102 SP2, and later mod levels and fix packs: Desktop and Server Editions
- SUSE Enterprise Linux 11, and later mod levels and fix packs: Desktop and Server Editions
Note:
- Requires the following minimum packages and their dependencies:
- compat-db-4.6.21-15
- libXp-1.0.0-15.1
- libXmu-1.0.5-1
- libXtst-1.0.99.2-3
- pam-1.1.1-4
- libXft-2.1.13-4.1
- gtk2-2.18.9-4
- gtk2-engines-2.18.4-5
Windows x86 Platform
The following operating systems are supported for the Recovery Agent on the Windows x86 platform:
- Windows Server 2008 SP1, and later Service Packs: Standard, Enterprise, Datacenter, Storage Server, Storage Server R2, Small Business Server, Essential Business Server, and Web Editions
- Windows Vista SP1, and later Service Packs: Business, Enterprise, Home Basic, Home Premium, Starter, and Ultimate Editions
- Windows 7, and later Service Packs: Enterprise, Home Premium, Professional, Starter, and Ultimate Editions
- Windows 8, Professional and Enterprise Editions
Note: If you use Active Directory with Microsoft Windows 2008 or Microsoft Windows 2008 R2, install the hot fix associated with Microsoft Knowledge Base article 970770 at
http://support.microsoft.com/default.aspx?scid=kb;EN-US;970770
Windows x64 Platform
The following operating systems are supported for the Recovery Agent on the Windows x64 platform:
- Windows Server 2008 SP1, and later Service Packs: Standard, Enterprise, Datacenter, Storage Server, Storage Server R2, Small Business Server, Essential Business Server, and Web Editions
- Windows Server 2008 R2, and later Service Packs: Standard, Enterprise, Datacenter, Storage Server, Storage Server R2, Small Business Server, Essential Business Server, and Web Editions
- Windows Vista SP1, and later Service Packs: Business, Enterprise, Home Premium, Starter, and Ultimate Editions
- Windows 7, and later Service Packs: Enterprise, Home Premium, Professional, and Ultimate Editions
- Windows 8, Professional and Enterprise Editions
- Windows Server 2012 Essentials, Standard, and Datacenter Editions
Note: If you use Active Directory with Microsoft Windows 2008 or Microsoft Windows 2008 R2, install the hot fix associated with Microsoft Knowledge Base article 970770 at:
http://support.microsoft.com/default.aspx?scid=kb;EN-US;970770
Additional software requirements and limitations
The following additional software is required to use Data Protection for VMware:
- Tivoli Storage Manager (TSM Server) 6.2 and later interim fixes and fix packs
- Tivoli Storage Manager (TSM Server) 6.3 and later interim fixes and fix packs
- Tivoli Storage Manager (TSM Server) 7.1 and later interim fixes and fix packs
- TIP: TSM Client/API and Server compatibility information is located in the IBM Tivoli Storage Manager Server/Client Compatibility and Upgrade Considerations tech note located here: http://www.ibm.com/support/docview.wss?uid=swg21053218
- The Recovery Agent and VMware vCenter Plugin require the following supporting applications on Linux:
- The Data Protection for VMware GUI on Windows requires Microsoft Internet Explorer version 8 or 9 to be installed on the system where the plug-in will be launched.
- Perl version 5
mdadm 2.6 tool for managing Linux Software RAID arrays
iSCSI Initiator 6.2 for Linux package
lsscsi command version 0.23
iscsiadm utility 0.10
Secure Shell (SSH) client for Linux 0.1
- The application-aware log truncation function is not supported with guests running in ESX/ESXi 4.1
Hardware requirements for Data Protection for VMware
Hardware requirements vary and depend on the following items:
- Number of protected servers
- Number of protected volumes
- Data set sizes
- LAN and SAN connectivity
The following table describes the hardware requirements that are needed to install Data Protection for VMware.
| Component | Minimal requirement | Preferred |
| System | IntelPentium D 3 GHz Dual Core processor or compatible | Not applicable |
| Memory | 2 GB RAM, 2 GB virtual address space | Not applicable |
| Available hard disk | 200 MB for 'Documents and Settings' folder | 2 GB |
| NIC Card | 1 NIC - 100 Mbps | 1 NIC - 1 Gbps |
Where to download Tivoli Storage Manager for Virtual Environments 6.4.1
The Tivoli Storage Manager for Virtual Environments download document provides information about how and where to obtain the Tivoli Storage Manager for Virtual Environments 6.4.1 package. The information is located at: http://www.ibm.com/support/docview.wss?uid=swg24035577
TIP: Data Protection for VMware 6.4.1 is a component of Tivoli Storage Manager for Virtual Environments 6.4.1
Hardware and Software requirements for other releases of Data Protection for VMware
The Hardware and Software requirements for other releases and fix packs of Data Protection for VMware are located in the "Tivoli Storage Manager for Virtual Environments - All Requirements Doc" located at:
http://www.ibm.com/support/docview.wss?uid=swg21505139
Related Information
[{"Product":{"code":"SS8TDQ","label":"Tivoli Storage Manager for Virtual Environments"},"Business Unit":{"code":"BU058","label":"IBM Infrastructure w\/TPS"},"Component":"Data Protection for VMware","Platform":[{"code":"PF016","label":"Linux"},{"code":"PF033","label":"Windows"}],"Version":"6.4","Edition":"","Line of Business":{"code":"LOB26","label":"Storage"}}]
Was this topic helpful?
Document Information
Modified date:
17 June 2018
UID
swg21647461