IV68184: CREATING THE FEATURE MANUALLY DOESS NOT SHOW IN THE "MAXIMO GRAPHIC LINEAR TOOL".

APAR status

• Closed as Vendor Solution.

Error description

• REPRODUCTION STEPS FROM L2 LAB
  1. Go to Asset application
  2. Create a new record
  Any ID, Any Description
  Check Liear Asset
  
  Linear Referencing Details
  Direction: North
  LRM: KILOMETERS
  Start Measures: 0.00
  End Measures: 5.00
  
  3. Save the Record.
  
  4. Click on Tab Features
  
  5. Section Features, click New row
  
  6. Enter Feature MP and Start Measure: 0 Share with RA: tick, on
  Related Asset: not ticked
  
  7. Save the record.
  
  Reproduction:
  Asset:   EG42306 test 1
  
  If I now create 3 different Relationships (with Use as
  Reference = No),
  my 3 Relationships will show up correctly:
  No 1 Source Start Measure: 0 Source End Measure:0 Relationsipt:
  MP, Target Asset 1001 (I see half of the Icon, which is OK)
  No 2 Source Start Measure: 2 Source End Measure:2 Relationsipt:
  MP, Target Asset 1001 (I see the whole Icon, which is OK)
  No 3 Source Start Measure: 5 Source End Measure:5 Relationsipt:
  MP,Target Asset 1001 (I see half of the Icon, which is OK)
  
  If I now create 3 different Features , 2 of the 3 Features will
  show up correctly:
  No 1 Start Measure: 0 End Measure: 0 Share wra: tick, On
  related asset:
  not ticked (I see nothing, which is NOT OK)
  No 2 Start Measure: 2 End Measure: 2 Share wra: tick, On
  related asset:
  not ticked (I see the whole Icon, which is OK)
  No 2 Start Measure: 5 End Measure: 5 Share wra: tick, On
  related asset:
  not ticked (I see half of the Icon, which is OK)
  
  Asset:   EM42306 Test 2
  
  If I now create 3 different Relationships (with Use as
  Reference = Yes), my 3 Relationships will show up correctly:
  No 1 Source Start Measure: 0 Source End Measure:0 Relationsipt:
  MP, Target Asset 1001 (I see half of the Icon, which is OK)
  No 2 Source Start Measure: 2 Source End Measure:2 Relationsipt:
  MP, Target Asset 1001 (I see the whole Icon, which is OK)
  No 3 Source Start Measure: 5 Source End Measure:5 Relationsipt:
  MP, Target Asset 1001 (I see half of the Icon, which is OK)
  
  If I now create 3 different Features , 2 of the 3 Features will
  show up correctly: No 1 Start Measure: 0 End Measure: 0 Share
  wra: tick, On related asset: not ticked (I see nothing, which
  is NOT OK)
  No 2 Start Measure: 2 End Measure: 2 Share wra: tick, On
  related asset: not ticked (I see the whole Icon, which is OK)
  No 2 Start Measure: 5 End Measure: 5 Share wra: tick, On
  related asset: not ticked (I see half of the Icon, which is OK)
  
  Action Taken: Escalate to L3
  Action Plan:   Wait for approval
  
  PROBLEM DESCRIPTION
   The Linear Asset where creating the Feature manually is
  not shown in the "Maximo Graphic Linear Tool".
  
  REPRODUCTION STEPS FROM CUSTOMER
  Steps to replicate with screenshots can be found here:
  
  https://ecurep.mainz.de.ibm.com/rest/download/42306%2C999%2C846/
  2014-09-25/42306.999.846.Problem_with_showing_Features.pdf
  
  REPRODUCTION STEPS FROM L2 LAB
  1. Go to Asset application
  2. Create a new record
  Any ID, Any Description
  Check Liear Asset
  
  Linear Referencing Details
  Direction: North
  LRM: KILOMETERS
  Start Measures: 0.00
  End Measures: 5.00
  
  3. Save the Record.
  
  4. Click on Tab Features
  
  5. Section Features, click New row
  
  6. Enter Feature MP and Start Measure: 0 Share with RA: tick, on
  Related Asset: not ticked
  
  7. Save the record.
  
  Reproduction:
  Asset:   EG42306 test 1
  
  If I now create 3 different Relationships (with Use as
  Reference = No),
  my 3 Relationships will show up correctly:
  No 1 Source Start Measure: 0 Source End Measure:0 Relationsipt:
  MP,
  Target Asset 1001 (I see half of the Icon, which is OK)
  No 2 Source Start Measure: 2 Source End Measure:2 Relationsipt:
  MP,
  Target Asset 1001 (I see the whole Icon, which is OK)
  No 3 Source Start Measure: 5 Source End Measure:5 Relationsipt:
  MP,
  Target Asset 1001 (I see half of the Icon, which is OK)
  
  If I now create 3 different Features , 2 of the 3 Features will
  show up
  correctly:
  No 1 Start Measure: 0 End Measure: 0 Share wra: tick, On
  related asset:
  not ticked (I see nothing, which is NOT OK)
  No 2 Start Measure: 2 End Measure: 2 Share wra: tick, On
  related asset:
  not ticked (I see the whole Icon, which is OK)
  No 2 Start Measure: 5 End Measure: 5 Share wra: tick, On
  related asset:
  not ticked (I see half of the Icon, which is OK)
  
  Asset:   EM42306 Test 2
  
  If I now create 3 different Relationships (with Use as
  Reference =
  Yes), my 3 Relationships will show up correctly:
  No 1 Source Start Measure: 0 Source End Measure:0 Relationsipt:
  MP,
  Target Asset 1001 (I see half of the Icon, which is OK)
  No 2 Source Start Measure: 2 Source End Measure:2 Relationsipt:
  MP,
  Target Asset 1001 (I see the whole Icon, which is OK)
  No 3 Source Start Measure: 5 Source End Measure:5 Relationsipt:
  MP,
  Target Asset 1001 (I see half of the Icon, which is OK)
  
  If I now create 3 different Features , 2 of the 3 Features will
  show up
  correctly:
  No 1 Start Measure: 0 End Measure: 0 Share wra: tick, On
  related asset:
  not ticked (I see nothing, which is NOT OK)
  No 2 Start Measure: 2 End Measure: 2 Share wra: tick, On
  related asset:
  not ticked (I see the whole Icon, which is OK)
  No 2 Start Measure: 5 End Measure: 5 Share wra: tick, On
  related asset:
  not ticked (I see half of the Icon, which is OK)
  
  ENVIRONMENT
  
  IBM Maximo Asset Management 7.5.0.5 Build 201309040937 DB Build
  V7503-01
  IBM Maximo Linear Management 7.5.0.0 Build 20130903-1504 DB
  Build V7500-01
  Tivoli's process automation engine 7.5.0.5 Build 20130903-1504
  DB Build V7505-43
  IBM Maximo Spatial Asset Management 7.5.0.1 Build 20120714-2208
  DB Build V7501-13
  IBM TPAE Integration Framework 7.5.1.0 Build 20130829-1209 DB
  Build V7510-28
  

Local fix

Problem summary

Problem conclusion

Temporary fix

Comments

• Problem is in third-party control used for Linear Visual
  Control.
  

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

Applicable component levels