IC89113: THE NETWORK INTERFACE COUNTERS FOR VLANS ALWAYS DISPLAY 0, EVEN WHEN THEY ARE ACTIVELY BEING USED FOR TRAFFIC.

APAR status

• Closed as program error.

Error description

• The network interface counters displayed for VLANs are always 0,
  
  even
  if they are actively being used for traffic. The network
  interface counters can
  be displayed by any of the following methods:
  
  1) "show network-interface" in the CLI
  2) Navigating to "Status->IP-Network->Network Interfaces" in the
  WebGUI
  3) Using SOMA to get-status for all classes or
  class="NetworkInterfaceStatus"
  

Local fix

Problem summary

• Affected are customers configuring VLAN virtual interfaces on
  DataPower appliances running firmware versions 5.0.0.0-5.0.0.4.
  Earlier firmware releases are not affected.
  
  Network interface statistics reported via "show
  network-interface" CLI command, WebGUI or other management
  channels report all counts as 0 for each VLAN interface even if
  the interface takes traffic.
  
  This is caused by a programming error in the VLAN interface
  implementation.
  

Problem conclusion

• The fix is available in 5.0.0.5.
  
  For a list of the latest fix packs available, please see:
  
  http://www-01.ibm.com/support/docview.wss?uid=swg21237631
  

Temporary fix

Comments

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

• Fixed component name

  DATAPOWER

• Fixed component ID

  DP1234567

Applicable component levels

• R500 PSN

     UP