IBM Support

SI71528 - OSP CHGKRBPWD not accepting current password correctly

PTF Cover Letter


PTF ( Program Temporary Fixes ) Cover letter


Order this fix

Abstract

OSP CHGKRBPWD not accepting current password correctly


Pre/Co-Requisite PTF / Fix List

REQ  LICENSED           PTF/FIX  LEVEL

TYPE PROGRAM  RELEASE   NUMBER   MIN/MAX  OPTION
---- -------- --------- -------  -------  ------
NONE



NOTICE:
-------
Application of this PTF may disable or render ineffective programs that
use system memory addresses not generated by the IBM translator,
including programs that circumvent control technology designed to limit
interactive capacity to purchased levels.  This PTF may be a prerequisite
for future PTFs.  By applying this PTF you authorize and agree to the
foregoing.

This PTF is subject to the terms of the license agreement which
accompanied, or was contained in, the Program for which you are obtaining
the PTF.  You are not authorized to install or use the PTF except as part
of a Program for which you have a valid Proof of Entitlement.

SUBJECT TO ANY WARRANTIES WHICH CAN NOT BE EXCLUDED OR EXCEPT AS EXPLICITLY
AGREED TO IN THE APPLICABLE LICENSE AGREEMENT OR AN APPLICABLE SUPPORT
AGREEMENT, IBM MAKES NO WARRANTIES OR CONDITIONS EITHER EXPRESS OR IMPLIED,
INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OR CONDITIONS OF
MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, AND NON INFRINGEMENT,
REGARDING THE PTF.

The applicable license agreement may have been provided to you in printed
form and/or may be viewed using the Work with Software Agreements (WRKSFWAGR)
CL command.





APAR Error Description / Circumvention

-----------------------------------------------
Change Kerberos Password (CHGKRBPWD) command is sending error
message CPFC60E - Password is not correct for principal, when
the password is correct.

CORRECTION FOR APAR SE72412 :
-----------------------------
Processing of the length of the password was incorrect. This
will be fixed.

CIRCUMVENTION FOR APAR SE72412 :
--------------------------------
None.


Activation Instructions


None.




Special Instructions


********************************************************************
THE FOLLOWING ARE SUPERSEDED SPECIAL INSTRUCTIONS. IF THE SUPERSEDED
PTF HAS ALREADY BEEN APPLIED AND ITS SPECIAL INSTRUCTION FOLLOWED,
IT IS NOT NECESSARY TO FOLLOW THAT SPECIAL INSTRUCTION AGAIN.
********************************************************************

SPECIAL INSTRUCTIONS FOR SUPERSEDED PTF SI65767 :
=================================================

To activate the fix, all existing signon server, TELNET device
manager, and NetServer jobs need to be ended and restarted.

Signon Server:
To activate the fix for the signon server, the prestart jobs must be
ended and restarted. To end and restart the prestart jobs, do the
following:
1) See if any prestart jobs exist. As shipped, the prestart jobs run
in the QUSRWRK subsystem (you may have customized your system in order
to allow them to run in a different subsystem). Enter WRKACTJOB, then
press F14=Include. Look for jobs with the jobname QZSOSIGN. If any
exist, they must be ended and restarted in order to use the fixed code.

2) End the prestart jobs. Use the End Prestart Job (ENDPJ) command,
specifying the subsystem QUSRWRK (or the subsystem the prestart jobs
are configured to run in), program QZSOSIGN in library QSYS. Specify
*CNTRLD for the OPTION parameter to end the prestart jobs in a
controlled manner. Specify *IMMED for the option parameter to end the
prestart jobs immediately. Message CPC0905 is sent to the system
operator message queue when the prestart jobs have ended.

3) Restart the prestart jobs. Use the Start Prestart Job (STRPJ)
command, specifying the subsystem QUSRWRK (or the subsystem the
prestart jobs are configured to run in), program QZSOSIGN in library
QSYS. This starts the prestart jobs for the signon server.

Telnet:
To activate the fix for the TELNET device manager jobs, the following
must be done.
1) End TELNET with the following command: ENDTCPSVR SERVER(*TELNET)
2) Find all active TELNET device manager jobs: WRKACTJOB
JOB(QTVDEVICE).
3) End all jobs found above using Option 4=End. You can speed this
process by using the parameter OPTION(*IMMED) on the command line of
the WRKACTJOB panel. You must wait for all jobs to end before
proceeding to the next step.
4) Start both the TELNET server and device manager jobs with the
command: STRTCPSVR SERVER(*TELNET)

Netserver:
To activate the fix for NetServer, it must be stopped and restarted.
1) Stop NetServer by issuing the following command: ENDTCPSVR *NETSVR
2) Start NetServer by issuing the following command: STRTCPSVR *NETSVR

SPECIAL INSTRUCTIONS FOR SUPERSEDED PTF SI59232 :
=================================================

To activate the fix, all existing signon server, TELNET device
manager, and NetServer jobs need to be ended and restarted.

To activate the fix for the signon server, the prestart jobs must be
ended and restarted. To end and restart the prestart jobs, do the
following:
1) See if any prestart jobs exist. As shipped, the prestart jobs run
in the QUSRWRK subsystem (you may have customized your system in order
to allow them to run in a different subsystem). Enter WRKACTJOB, then
press F14=Include. Look for jobs with the jobname QZSOSIGN. If any
exist, they must be ended and restarted in order to use the fixed code.

2) End the prestart jobs. Use the End Prestart Job (ENDPJ) command,
specifying the subsystem QUSRWRK (or the subsystem the prestart jobs
are configured to run in), program QZSOSIGN in library QSYS. Specify
*CNTRLD for the OPTION parameter to end the prestart jobs in a
controlled manner. Specify *IMMED for the option parameter to end the
prestart jobs immediately. Message CPC0905 is sent to the system
operator message queue when the prestart jobs have ended.

3) Restart the prestart jobs. Use the Start Prestart Job (STRPJ)
command, specifying the subsystem QUSRWRK (or the subsystem the
prestart jobs are configured to run in), program QZSOSIGN in library
QSYS. This starts the prestart jobs for the signon server.

To activate the fix for the TELNET device manager jobs, the following
must be done.
1) End TELNET with the following command: ENDTCPSVR SERVER(*TELNET)
2) Find all active TELNET device manager jobs: WRKACTJOB
JOB(QTVDEVICE).
3) End all jobs found above using Option 4=End. You can speed this
process by using the parameter OPTION(*IMMED) on the command line of
the WRKACTJOB panel. You must wait for all jobs to end before
proceeding to the next step.
4) Start both the TELNET server and device manager jobs with the
command: STRTCPSVR SERVER(*TELNET)

To activate the fix for NetServer, it must be stopped and restarted.
1) Stop NetServer by issuing the following command: ENDTCPSVR *NETSVR
2) Start NetServer by issuing the following command: STRTCPSVR *NETSVR


Default Instructions

THIS PTF CAN BE APPLIED IMMEDIATE OR DELAYED.



Supersedes

PTF/FIX NO(S).  APAR TITLE LINE
--------------  ------------------------------------------------------------
   SI65910      OSP Specifying the version on keytab delete does not functio
   SI65767      OSP  Add internal kerberos interfaces for QNTC
   SI65252      OSP kerberos keytab entries are not being shown
   SI60097      OSP-OTHER-SAP400-THREADS-F/QKRBGSS-T/QKRBGSS-MSGCPFC611 DLTK
   SI59232      OSP-MSGMUTEXBOTTLENECK BOTTLENECK BY NOT REQUIRING THE MUTEX
   SI58141      OSP-INCORROUT IBM i NetServer signing of AES Kerberos connec
   SI57628      OSP-OTHER-THREADS-WAIT HTTP SERVER FAILS TO END WITH ENDTCPS
   SI56723      WAIT-HLIC SINGLE SIGN ON TAKES A LONG TIME TO CONNECT
   SI52296      OSP-OTHER-UNPRED LS IN QSHELL ON REMOTE SERVER IN QNTC WITH
   SI51377      OSP Kerberos GSS Updates

Summary Information

System..............................i
Models..............................
Release.............................V7R2M0
Licensed Program...............5770SS1
APAR Fixed..........................View details for APAR SE72412
Superseded by:......................View fix details for PTF SI78019
Recompile...........................N
Library.............................QSYS
MRI Feature ........................NONE
Cum Level...........................C0296720


IBM i Support

IBM disclaims all warranties, whether express or implied, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. By furnishing this document, IBM grants no licenses to any related patents or copyrights. Copyright © 1996,1997,1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021 IBM Corporation. Any trademarks and product or brand names referenced in this document are the property of their respective owners. Consult the Terms of use link for trademark information.

[{"Business Unit":{"code":"BU058","label":"IBM Infrastructure w\/TPS"},"Platform":[{"code":"PF012","label":"IBM i"}],"Version":"7.2.0","Product":{"code":"SWG60","label":"IBM i"},"Component":"5770SS1","Edition":"","Line of Business":{"code":"LOB57","label":"Power"}}]

Document Information

Modified date:
03 December 2021