Discussion about RPT and schedule execution error "The workbench received notification that the execution process on Driver <<Agent Machine>> has terminated"
Rajeshavanthi 2700022MCX Visits (152)
IBM Rational Performance Tester (RPT) is a performance test tool which measures the performance of an IT system by generating load on it and measuring the response times of the system under load. RPT generates load by simulating the actions on the system of multiple simultaneous users. In order to achieve this, you might have to design the schedule with appropriate user load defined and configure the locations where these pre-defined user load needs to be executed.
Often times, when you perform such actions where the user loads are pushed on to the agent machine, you might / might not encounter various errors which could be related to insufficient memory defined for the execution, or network connection problems and so on....
This article specifically discusses one such error which is contributed by the way the RPT v184.108.40.206 agent component contributes to the schedule execution and the occurrence of this error holds good for any higher versions of RPT. However, the following solution is restricted for those who are working on the RPT v220.127.116.11 release.
Error: The workbench received notification that the execution process on Driver <<Agent Machine>> has terminated"
The above error might occur even when you try executing a schedule (irrespective of the virtual user load defined) locally on the RPT workbench or explicitly on external Agent machine. You might get involved in various troubleshooting methods such as :
6. Restart the workbench machine and agent machines
7. Configure the schedule with default settings by reducing the logging levels, set the user load = 1vu and execute the schedule
Despite attempting all these methods, the error persists, irrespective of the user load defined. Note that this is a known behavior in RPT 18.104.22.168 with deployment of cross-project assets. You can upgrade to RPT v8.6 where the problem is fixed.
RojaAyyagary 270005QDMN Visits (323)
Ever wondered how you could split a large test into small scripts? Also interested in playing back scripts from multiple protocols in a single schedule?
Compound tests help you to organize smaller tests into scenarios that can then be run end-to-end. Each of the smaller tests in a compound test can run on a different domain if required, such as a mobile device, or a web browser, and so on.
If you need to combine various tests into a single workflow or end-to-end scenario, you can organize the tests into a compound test. Each test may perform a part of the scenario. Each test may also run in a different domain, for example, a web browser or a mobile device. A typical example of a compound test is an online buying workflow. You may have built smaller tests for each part of an online purchase transaction, such as "log on", "log out", "view item", "add to cart", and "check out". You can combine these tests into a single flow in a compound test. When the compound test is run, its individual tests are run in sequence.
The types of tests you can combine into a compound test depend on the testing capabilities you have purchased. If you have purchased only mobile testing capabilities, you can combine tests on mobile applications into a compound test. If you have purchased additional testing capabilities along with mobile testing, you can also combine tests built using Selenium, HTTP tests, Socket tests, Citrix tests or SAP tests into a compound test.
Compound tests can have the following:
When you run a compound test, its test elements are run in the order defined in the compound test. This compound test consists of WebUI test and SAP test.
When a compound test run is completed, a Test Log is shown in the Test Execution perspective. You can work with the information in the test log and also generate test result reports.
You can create a compound test in a test workbench project. If you have an existing compound test, you can import the test to a test workbench project.
Importing a compound test into a Test Workbench project
You can import a compound test into a test workbench project.
To test the performance of multiple tests, you can add all the tests to a compound test and add the compound test to a user group. When you run a schedule, all the tests in the compound test are run in a sequential order.]
For additional information please refer to the Compound Tests topic in the IBM Knowledge Center.
Arun K Sriramaiah 2700076GE8 Visits (345)
The RTC workitem id, which is generated automatically from the system, also assigns an internalID.
When a customer has multiple teams, such as developers and a management team, simultaneously working on projects,
how can you identify which work item ids belong to which projects or departments?
RTC Workitem id's can be prefixed with the project\department names + internalID in attribute customization calculated value script.
You can use this customization if the value of an attribute must be calculated instead of entered by the user. Optionally, the calculated value can depend on the value of other attributes in the same work item. An attribute configured with a calculated value customization should use a read-only presentation. Here are all Calculated Value customizations that you can configure using the Eclipse client:
1) Enable scripts: Go to administrative page of your RTC server : http
5) Save the workitem and verify that the Newid attribute value should be ( "IOT Banking "+in
dmmckinn 1200006SCS Visits (353)
If you are planning an installation or upgrade of ClearCase or ClearQuest in the near future, the following information will be helpful. Certain integration solutions and operating systems will no longer be supported in 2016.
Refer to the following recently published planning document for further details:
Additional information about end of support for individual products versions is also available on the IBM Software support lifecycle pages at the following links:
Rational Quality Manager v6.0: Images which are part of Test-Case Design section do not get exported to Portable Document Format (PDF)
Rajeshavanthi 2700022MCX Visits (242)
Often times, you might have data requirements which are documented in external data source files such as Comma separated Value (CSV) or Microsoft Excel worksheet. Microsoft Excel and Word are popular document formats used by many test organizations to author, store and maintain their test assets. These document formats are easy to use and widely available.
So if any of your project teams are working on such external data sources and want to import the data involving relevant image files into IBM Rational Quality Manager (RQM), they can make use of the RQMExcelImporter utility.
In fact, RQM software helps teams share information seamlessly, use automation to accelerate project schedules and report on metrics for informed release decisions.
Rational Quality Manager helps quality assurance teams by providing the below functionalities.
Below is one such scenario which will describe how to import a few test assets and an image specifically into RQM. It also describes a defect behavior of the imported images (part of Test Case Design section in RQM), not getting exported to PDF file, though the import was successful.
For example: Image is successfully imported into Test case design section, but when we create a comprehensive PDF export, the image does not get exported. Interestingly, if you manually cut past an image within the Test Case Design section in RQM, the import gets exported to PDF successfully.
Debugging this problem, prompted a couple of questions like...
Let's analyze this scenario now...
Below is the snapshot of the data which is documented in the MS Excel worksheet.
Following is the Configuration file (CFG file) which will map to each entries present in the rows and columns of this worksheet .
Using the RQMExcelImporter utility, import the Excel data into RQM and you should see the data layout as shown below:
So, once you have the data imported, you can export this data to available PDF formats in RQM.
However the exported PDF does not display the image as you can see in the below snapshot: