It's 10 AM Monday morning, time for the IT department status meeting. The new director opens the meeting and asks each person for a status of the previous week's activities. Finally, it is your turn. "Last week we renamed 1,000 users, issued 800 Web certificates, created 200 replicas, and moved 650 users to a new server. We did that with one administrator and one operator." The director looks at you in total disbelief and asks, "You did all that with just two people?" You nod and reply, "Actually the operator did most of the work." Finally the perplexed director asks, "What magic did you use to make that happen?" Smiling, you respond with a single word, "AdminP!"
The preceding scenario is no fantasy—AdminP (also knows as the Administration Process) is indeed this powerful. AdminP is a program that automates many routine administrative tasks for a Domino environment. These tasks can include managing (among many other things):
- Mail files (moving and deleting mail files, delegating calendars without providing Manager access, and enabling the "Out of Office" agent without Designer access)
- Replicas (creating, moving, and deleting replicas)
- User names (person and group renaming, deleting servers, internal certificate management, moving users from one organization level certificate to another, and automatically updating ID recovery information)
This article is the first of a two-part series describing all the components of AdminP. We discuss how each component works, and how you can use these features to make your job much easier (and to impress your boss). This article assumes that you're an experienced Domino administrator, familiar with Notes and Domino terminology.
In this article, we define AdminP as a set of components, rather than a single element. These components include:
- AdminP server task
- Administrator client (Domino and/or Web)
- Notes client
- Domino Directory (names.nsf)
- Certification log database (certlog.nsf)
- Administration Request database (admin4.nsf)
- Administration server (assigned to each database in the domain)
The following sections briefly describe these components.
AdminP server task
The AdminP server task runs on all Domino servers. This task loads when the Domino server is first started and is controlled through the Notes.ini variable ServerTasks. The AdminP server task wakes up on periodic time intervals (specified in the Administration Process section of the Server document) and executes commands waiting in the Administration Request database. Each command placed in the Administration Request database has an assigned proxy action. These proxy actions are essentially the Op-code that runs the Administration Process.
Each command placed in the Administration Request database is represented by a document. Each document has a number of fields, including one called ProxyAction. After each action has completed on a server, a response document is created to indicate the status of that request.
AdminP requests are not limited to only one Notes domain. You can now set up cross domain documents to share some of the commands between domains.
The Administrator client has all of the tools needed to initiate the AdminP commands. These include renaming and deleting users, deleting a replica, moving a database, and moving a user from one hierarchy to another.
With Notes/Domino 6, the Notes client has now become an active participant in the administration process. The client now can complete and initiate many different administration processes. For example, the client can accept user name changes and x509v3 certificates into the Notes.id file. The client can initiate calendar ACL delegation. The client is involved with the process to move a user to another server and can issue a request to change the user's password and/or synchronize his Notes.id and Web password. And the client now automatically accepts ID recovery information without user prompts.
The Domino Directory provides part of the instructions used with AdminP. For instance, when a user is renamed, the certificate information is changed. This is stored in a Person document in the Domino Directory. When the renaming process is in progress, this is indicated in the Person document under the Change Request field. Each person's name is stored in various fields in the Person document. When a user is renamed, both the old name and new name are stored.
Also, every server has a Server document that controls how the server is managed. Every Server document has a section on AdminP parameters.
AdminP commands affect Domino Directory information, including:
- Resource names
- Person documents, including client information
- HTTP password synchronization
- Group updates and deletions
- Server information (protocol and version)
- Certificate Authority (CA) configuration
- License tracking
The Certification log database (certlog.nsf) is created when you install the first server in a domain. The Certification log records certification-related activities from Domino, including new user and server registration, user recertifications and renames, and user moves from one organization level certifier to another. Each log entry tracks the data shown in the following illustration:
Figure 1. Certification log
AdminP requires a Certification log on each server used to initiate administration requests. You can do this by creating a replica of the Certification log on every administration server and on every server used for user management.
Administration Request database
The Administration Request database (admin4.nsf) contains all the administrative requests from a single domain. Every request (via a proxy action) that is placed in the Administration Request database replicates to every server in the domain. This database is described in detail later in this article.
Every database must have an Administration server assigned to it, listed in the database's ACL. This includes the Domino Directory. The Administration server setting tells AdminP where to process each database. The Administration server appears in the ACL with a key icon next to its name. In each domain, there is a single Primary Administration server. The Primary Administration server is determined by the value in the ACL of the Domino Directory (names.nsf). To set the Administration server for a database (including the Primary Administration server), highlight the database and select File - Database - Access Control, then click Advanced:
Figure 2. Access Control List dialog box
For example, let's say you need to rename 1,000 users. Each user may have entries in Author, Reader, and Name fields in 100,000 documents in a single database. This means every document may need to be changed. Consider the following illustration:
Figure 3. Renaming 1,000 users
In this example, there are four servers and two applications. Server A is the Administration server for the Domino Directory. This makes it the Primary Administration server for this domain. Server B has two applications, App 1 and App 2. The Administration server for App 1 is Server B and the Administration server for App 2 is Server D. Server C has a replica of each application. The command to change the values of the Name fields is issued on the Primary Administration server (Server A) and then sent to the other servers for processing. Each server receives the commands and processes them based on the time of arrival and the settings in the Server document.
Notice that the App 1 database is on both Server B and Server C. If the name change command ran on both servers, you would have 100,000 changes in both replicas, resulting in a big mess of replication conflicts. AdminP is designed to keep that from happening by looking at the ACL of each database on each server. If the ACL Administration server entry matches the name of that server, it processes the command. If the database ACL Administration server entry does not match that server, the command is ignored. In the case of Server B, the ACL entry for App 1 identifies Server B as the Administration server. Thus, commands that arrive on Server B are executed on App 1. The administration commands are also sent to Server C. But this server does not have any applications that list it as the Administration server. So no commands are processed on Server C. Finally, Server D is listed as the Administration server in the ACL for App 2. So any commands arriving on Server D are executed on App 2.
As you can see, this architecture allows only one server to update any single application (via replica ID). So now you ask, "Do I need to add an Administration server entry for every database in my Domino environment?" The answer is yes—but don't panic; there are several ways you can do this:
Open the Advanced section of the ACL dialog and edit the Administration Server field. This works fine for one or two databases, but in large environments, this obviously would take a very long time.
- Via the Administrator client (Domino or Web)
The Administrator client allows you to set individual databases or a large group of databases with a single operation. Open the Administrator client and select the databases that need to be updated. Right-click and select Access Control - Manage. This opens the standard ACL dialog box. Edit the ACLs as needed and save the entry. This updates the Administration server setting on all selected databases.
- Via LotusScript
The NotesACLEntry Class has a Read/Write property that you can use in a LotusScript agent. Using the ISAdminServer property, you can create a simple agent that reads and/or sets the Administration server of an ACL entry.
- Via the Lotus Notes API
You can create your own custom tools to edit and manage the Administration server name of a database. Two functions commonly used for this are ACLGetAdminServer and ACLSetAdminServer.
- External vendor tools
There are many different vendor tools that include Administration server management features. Check with your vendor for details.
Now let's look at AdminP commands. Each command is controlled by an individual document placed into the Administration Request database. Every document has a field named ProxyAction. You can see these proxy actions in two places: the field properties of a document in the Administration Request database or in the Administration Request document form. For the latter, open the ProxyAction shared field and look at the list of choices, for example:
Figure 4. ProxyAction field values
Each proxy action has a number. R5 has 82 different proxy actions and Domino 6 has 165. Proxy action numbers are backward compatible. For example, proxy action 1 (which renames a user in an Access Control List) is the same in both R5 and Domino 6, and proxy action 119 (rename a Web user in an Access Control List) is new to Domino 6. See the Proxy actions in R5 and Domino 6 sidebar for a complete list.
Each AdminP request can create a response document called the Process Log. The response document shows if an AdminP request completed successfully or failed with an error message. Most proxy actions are created on the Primary Administration server. Some can be initiated on a spoke Administration server. For example, if you rename a user, the primary request is issued by AdminP at the Primary Administration server. In this example, a proxy action 6 (move person's name in hierarchy) is created on the Primary Administration server. You approve the name change and the Primary Administration server creates a proxy action 8 (initiate a rename in the Domino Directory). AdminP updates the public key and also updates the Certificate Request field in the Person document.
In the Person document Administration tab, there is a field titled Change Request. The internal name of this field is DisplaychangeRequest. The field formula is:
@If((ChangeRequest != "" | $AdminpOldWebNameExpires != ""); "Pending";"None")
If there is a value in the Change Request field, a value of Pending appears.
Types of proxy actions
There are three basic types of AdminP proxy actions:
- Operations that execute on the Primary Administration server
- Operations that execute on all spoke Administration servers
- Operations that execute on a targeted server
The following sections describe these proxy action types.
Operations that execute on the Primary Administration server
Most AdminP processes start on the Primary Administration server. However, the actual command (the document with a proxy action) can be created on virtually any server. Let's consider renaming the user's organization level. This is a proxy action 6 (move person's name in hierarchy). You start this process from the Domino Directory. A document is created in the Administration Request database that requires administrator approval. After this document is approved, another document is created. This is a proxy action 8 (initiate rename in Address book). This proxy action can only run on the Primary Administration server.
The Domino Directory is updated with the user's information after proxy action 8 executes successfully. This replicates to a spoke server. The user opens a database on this spoke server and a proxy action 5 (rename person in Address book) is created. Next, the Administration Request database replicates with the Primary Administration server, and this action is executed. In this example, proxy actions 6, 8, and 5 all ran on the Primary Administration server. Proxy action 5 was created on the spoke server, but this action was initiated when the Domino Directory was updated for that user. In each case, the actual execution of the proxy action was completed by the Primary Administration server, not on a spoke server.
The following table lists AdminP proxy actions that execute only on the Primary Administration Server (note this is not the complete list):
- Accelerate create replica
- Add Internet certificate to Person document
- Add or modify group in Domino Directory
- Approve delete person in Domino Directory
- Approve delete server in Domino Directory
- Approve rename person in Domino Directory
- Approve rename server in Domino Directory
- Change HTTP password in Domino Directory
- Change user password in Domino Directory
- Delete group in Domino Directory
- Delete in Domino Directory
- Delete in Person documents
- Delete person in Domino Directory
- Delete Policy document in Domino Directory
- Delete server in Domino Directory
- Delete statistic monitors in Domino Directory
- Delete Web user in Domino Directory
- Initiate rename in Domino Directory
- Initiate Web user rename in Domino Directory
- Modify CA configuration in Domino Directory
- Modify ID recovery information in Domino Directory
- Modify room/resource in Domino Directory
- Modify user information stored in Domino Directory
- Move person's name in hierarchy (actually this action can be approved on any server)
- Place server's Notes build number into Server document
- Re-initiate rename in Domino Directory
- Recertify Certificate Authority in Domino Directory
- Recertify cross certificate in Domino Directory
- Recertify person in Domino Directory
- Recertify server in Domino Directory
- Rename person in Domino Directory
- Rename server in Domino Directory
- Rename Web user in Domino Directory
- Rename Web user in Person documents
- Replace roaming server's field in Person document
- Store directory type in Server document
- Update license tracking information in Domino Directory
- Update roaming user state in Person document
- Update roaming user information in Person document
You may ask, "How will I know what type of command will operate on which server?" Open any Administration Request database and look at the AdminP request document. You see a field titled Server(s) to perform the action. In our example, this field is set to Administration server for the Domino Directory.
Operations that execute on all spoke servers
Let's continue with our example. The user has accepted the new name and a proxy action 8 (initiate rename in Address book) has been created on one of the spoke servers. This action now replicates to the Primary Administration server for the domain. After this proxy action executes, AdminP creates additional requests. One of these is a proxy action to update the ACLs in each database on every server in the domain. This is proxy action 1. Again, this is easy to determine by just looking at the Request document in the Administration Request database.
The Request document includes the field Server(s) to perform the action: See example figure below. If an asterisk appears in this field, this command attempts to execute on all servers in the domain. Here are a few examples of "asterisk" commands:
- Delete user in Access Control List
- Rename in Access Control List
- Move person's name in hierarchy
- Delete in Reader/Author fields
- Rename person in unread list
Operations that execute on a targeted server
AdminP is actually really smart. This is where the targeted server commands come in. Again, let's go on with our example of our renamed users. So far, you have run the rename process, the user has accepted the new name, and AdminP has issued a command to change the name in the ACL. Now AdminP analyzes the Person document of this user and determines if any targeted commands need to be created. If the user's Person document has a listing for a mail file, AdminP creates two commands:
- Rename person in calendar entries and profiles in mail file
- Rename person in Free Time database
The commands replicate to the targeted server and execute there. You can determine which commands are for a targeted server by opening the Request document and looking at the field Server(s) to perform the action. In this case, the value is NTMain, meaning the command executes only on that server.
Now for a little bad news—unless you create a selective replication formula, all commands in the Administration Request database are replicated to all servers, including targeted server commands. To avoid this, here's a sample selected replication formula:
ASDDList := "0":"2":"3":"4":"5":"7":"8":"9":"10":"11":"12": "16":"19":"26":"28":"29":"30":"34":"35":"36":"37": "40":"41":"44":"46":"47":"50":"52":"54":"55":"56": "63":"64":"67":"70":"71":"73":"76":"77":"80":"83": "85":"86":"89":"95":"96":"97":"98":"99":"103":"107": "109":"110":"113":"118":"120":"121":"127": "133":"134":"136":"141":"144" :"146":"157":"159"; SELECT @IsMember (@LowerCase (@Name ([CN] ; ProxyServer));"*":@LowerCase(@Name([CN]; @UserName))) & Type != "AdminLog" & !@IsMember (ProxyAction;ASDDList)
Caution: This is sample code only. We do not offer support for this, so use it at your own risk. Put this formula on your spoke servers only, not your hub or Primary Administration server. Also, you may need to update this formula with each release of Domino.
Proxy action execution timing
Proxy Actions are executed at different times, based on the type of proxy action. There are four different intervals:
These requests typically execute within one minute. Examples include check mail server's access, promote new mail server's access, create new mail replica, add new mail file fields, replace mail file fields, and push changes to new mail server.
These requests are processed once a day as defined by a setting in the Server document. These requests include all new and modified daily requests to update the Person document in the Domino Directory, rename person in unread list, and delete obsolete change requests.
These are used by a recommended resource balancing plan. This process is generated by the Tivoli Analyzer. Time-based requests normally apply to move database or to create replica actions. Note that time-based execution requests let you specify the time that the AdminP request is executed. Examples of timed requests include check access for new replica creation, check access for move replica creation, check mail server's access, and check access for non-cluster move replica.
Delayed requests are executed by the timing set in the Server document. Rename in Reader/Author fields is a delayed request.
Administration Request database
All roads lead to Rome or, in our case, all AdminP actions end up in the Administration Request database. This database contains all requests for a single domain. (We will discuss cross domain functions in Part 2 of this article series.) Every request (via a proxy action) placed in the Administration Request database replicates to every server in the domain:
Figure 5. Admin4.nsf diagram
Each Administration Request database in a domain has the same replica ID and must replicate to all other servers in the domain that run AdminP. This allows one server to post a request and another to respond to it. When an additional server in your domain is set up, the Administration Request database is copied from the registration server to the new server.
For instance, let's say you want to recertify a user. The command to recertify a user in the Domino Directory (proxy action 10) can be issued to any server in the domain. The command replicates to the Primary Administration server (Server A in the preceding chart), where it executes. The process is started in the Administrator client when you request that a user be recertified. The proxy action is created in the Administration Request database.
After the request is placed into the database, AdminP on the Primary Administration server processes the command. This command does the following:
- Updates the Domino Directory's Person document for this user. The public key for the user is replaced by the value in the Administration Request document.
- Creates an AdminLog response document with status information.
When the user authenticates, the ID is updated with a new public key and possibly with a new expiration date.
The Administration Request database has a number of views. Each view provides reporting information or access to approve certain actions. (Many actions require approval from an administrator.) The following illustration shows the basic views in the Domino 6 Administration Request database:
Figure 6. Administration requests in Admin4.nsf
The following sections describe these views.
Administrative Attention Required
If an error is detected, ErrorFlag = "2". One example is when AdminP attempts to update Reader fields and fails. In this case, an error document is created and placed in this view. AdminP creates a doclink to each document it was unable to update.
Individual Approval Required
Documents appear in this view if the ApprovalFlag field is missing and if one of the following requests are issued:
- Cross domain requests, including approve delete person in Domino Directory, approve delete server in Domino Directory, approve rename person in Domino Directory, and approve rename server in Domino Directory
- Approve deletion of moved replica
- Approve refused name change
- Approve deletion of hosted organization storage
Pending Administrator Approval\By Age, Pending Administrator Approval\By Server
Documents show up in these views (sorted by age or server) if the ApprovalFlag field is missing and if one of the following requests are issued:
- Cross domain requests, including approve delete person in Domino Directory, approve delete server in Domino Directory, approve rename person in Domino Directory, and approve rename server in Domino Directory
- Approve resource deletion
- Approve deletion of private design elements
- Approve replica deletion
- Approve revert name change
- Approve certificate request
- Approve person's name change request
- Approve new public key request
All Activity by Server
This view organizes the Administration Log documents, so you can see the type of Administration Requests that have been performed on a person, group, or server.
All Errors by Date, All Errors by Server
All Errors by Date displays the Administration Log documents, so you can see all errors encountered by the servers performing Administration Requests. All Errors by Server displays the Administration Log documents, so you can see the errors each server encountered performing Administration Requests.
All Requests by Action, All Requests by Name, All Requests by Server
All Requests by Action shows the Administration Request documents, so you can see each request to be performed followed by the Administration Log response documents. All Requests by Name is one of the most useful views in the Administration Request database. This view shows you the name of the person, or server, that is being operated on. All Requests by Server is the default view in the database. This view shows the Administration Request documents so you can see all requests to be performed by a particular server followed by the Administration Log response documents.
All Requests by Originating Author
This view shows who has been issuing AdminP requests. This view when expanded also shows the person being processed.
All Requests by Time Initiated
This view displays each entry and response document, based on the sorting of when the proxy actions was first entered into the Administration Request database.
Name Move Requests
This view shows documents created when a person is moved within the hierarchical name tree. You select documents in this view and then choose Actions - Complete move for each selected entry. This is processed by AdminP and a proxy action 8 (initiate rename in Domino Directory) is created for each user.
Cross Domain Configuration
This view shows the configuration documents that control how the Cross Domain administration functions operate.
Cross Domain Delivery Failures
The Cross Domain administration function uses the Notes mailer (router) to send administration messages between domains. This shows NDR (non-delivery reports), showing failed attempts to send an update from one domain to another.
This view shows requests to create an Internet or Notes certificate. This view is monitored by the person assigned by the Certification Authority (CA) or Registration Authority (RA).
Recovery Information Update
This view is used with the CA process only. This view shows how AdminP updated the ID and password recovery information for any Notes ID that is stored in a CA database.
This article introduced you to AdminP. We took a quick tour of its components and explained how proxy actions and the Administration Request database work. In Part 2 of this series, we'll explore AdminP further, looking at cross domain administration requests and how to control AdminP functions through Server document settings, server console commands, the Notes.ini file, and database purge intervals.
- Proxy actions in R5 and Domino 6 sidebar
- Creating a custom Administration Process Request Handler
- LotusScript: The NotesAdministrationProcess Class in Notes/Domino 6
- Domino 6 Technical Overview
- All about AdminP Part 2