Kernel 2.2 based

Updates for Kernel 2.2.

• Environment
  • ESA/390™ Single Image
  • S/390® LPAR
  • VM/ESA® guest
• Central processor
  • IBM service and support is available for
    • 9672 Ri6 and 9672 Ri7 ("G5" and "G6")
    • 2064 Models 101-116 and 1C1-1C9 ("G7")
    • Multiprise 3000®
  • LINUX also runs on
    • 9672 Ri4, 9672 Ri5 ("G3", "G4")
    • Multiprise 2000®
    • P/390, R/390, Integrated Server
    • These machines may not be supported by middleware and other products
• Supported processor features
  • SMP
  • Hardware IEEE floating point
  • IEEE floating point emulation by LINUX for S/390 (limited to normalized IEEE floating point numbers)
  • Console Integration
• Block Devices
  • VM minidisks
  • ECKD™ 3380 or 3390 DASDs
  • FBA (9336, VDISK in storage)
  • Expanded Storage
• Tape Devices
  • all models of IBM 3480 Magnetical Tape Subsystem and 100% compatibles
  • all models of IBM 3490 Magnetical Tape Subsystem and 100% compatibles
• Network devices
  • Virtual CTC
  • Real CTC
  • LCS: OSA 2: Token Ring, Ethernet, Fast Ethernet
  • LCS: OSA-Express: Ethernet, Fast Ethernet
  • LCS: 2216: Token Ring, Ethernet
  • QDIO: OSA-Express: Gigabit Ethernet, Fast Ethernet
  • 3172
  • IUCV
• Channel devices
  • ESCON® connections
  • FICON™ (not tested)
  • Parallel Channels
• Character devices
  • 3215 console
  • Integrated Console
• IPL mechanisms
  • 3480 and 3490 tape units
  • VM reader
  • DASD
  • Load from CD-ROM (HMC) or FTP-Server on G5 or newer with recent SE-level
• Root file systems during IPL
  • Initial RAM disk
  • VM minidisk
  • DASD
  • NFS (only via CTC or IUCV)
• Linkage
  • ELF linkage

Back to top

• Hardware requirements
  • An S/390 or zSeries configuration with a recommended 64MB of memory (absolute minimum 16MB)
  • ESA/390 Basic Mode, S/390 LPAR or VM guest
  • ESAME Basic Mode, ESAME LPAR or z/VM guest for 64 bit
  • Under VM: a minidisk (recommended 500 Cylinders) or a dedicated ECKD DASD (3380 or 3390)
  • For native: ECKD DASD (3380 or 3390), 3390 Model 3 recommended
  • Temporary access to a tape unit for install
• Software requirements
  • A network connection (TCP/IP) to that OS, to transfer LINUX for S/390 to the system
  • If you want to use LINUX under VM APARs VM62520 and VM62573 should be applied. For VM TCP/IP PQ37002 should be applied.
  • If you want to use the IEEE hardware FPU, ensure you have APARs VM62337 and VM62410 installed before bringing up Linux under VM. Anyone IPL-ing Linux under VM/ESA V2R3.0 will need VM61762, too. It already exists in the 2.4.0 base.
  • If you want to use TCP/IP for VM/ESA, it is recommended that you install APAR PQ34318.
  • Following MCF is needed to run LCS on Multiprise 3000:
    EC Stream F34643 MCL048

Back to top