Kernel 2.4 based: OCOs for Red Hat

jump to RED HAT OCOs overview

If you download any software from this web site please be aware of the Warranty Disclaimer and Limitation of Liabilities.

• Red Hat Enterprise Linux Advanced Server 3 for S/390 and zSeries
• Kernel version: 2.4.21-4.0.1.EL (Errata titled "Updated kernel resolves 32-bit address space issue on AMD64") as released by Red Hat on 2003-10-30.
• For reference see: https://rhn.redhat.com/errata/RHBA-2003-308.html

Note, that these OCO-modules will most certainly not match any other (earlier or later) Red Hat distribution, nor any other distribution.

These RPMs contain the re-compiled versions of tape_3590 OCO modules for RHEL AS 3 kernel 2.4.21-4.0.1, functionally equivalent to the 2003-10-31 OCO modules.

1. Unpack the tarball: kernel-3590-2.4.21-4.0.1.EL.s390.tar.gz or kernel-3590-2.4.21-4.0.1.EL.s390x.tar.gz
2. As root, install the rpm using: rpm -i kernel-3590-2.4.21-4.0.1.EL.s390.rpm or rpm -i kernel-3590-2.4.21-4.0.1.EL.s390x.rpm
3. After applying the RPM you need to setup the command 'depmod -a' as root user.

1. Using tape block devices only works with manually created device nodes.
2. When loading a tape module, the names of the devices must be added explicitly, e.g.
   insmod tape390 tape=181
   insmod tape_3590