In a nutshell,
virtio is an abstraction layer
over devices in a paravirtualized hypervisor.
virtio was developed by Rusty Russell in
support of his own virtualization solution called
lguest. This article begins with an
introduction to paravirtualization and emulated devices, and then explores
the details of
virtio. The focus is on the
virtio framework from the 2.6.30 kernel
Linux is the hypervisor playground. As my article on Linux
as a hypervisor showed, Linux
offers a variety of hypervisor solutions with different attributes and
advantages. Examples include the Kernel-based Virtual Machine (KVM),
lguest, and User-mode Linux. Having these
different hypervisor solutions on Linux can tax the operating system based
on their independent needs. One of the taxes is virtualization of devices.
Rather than have a variety of device emulation mechanisms (for network,
block, and other drivers),
virtio provides a
common front end for these device emulations to standardize the interface
and increase the reuse of code across the platforms.
Full virtualization vs. paravirtualization
Let's start with a quick discussion of two distinct types of virtualization schemes: full virtualization and paravirtualization. In full virtualization, the guest operating system runs on top of a hypervisor that sits on the bare metal. The guest is unaware that it is being virtualized and requires no changes to work in this configuration. Conversely, in paravirtualization, the guest operating system is not only aware that it is running on a hypervisor but includes code to make guest-to-hypervisor transitions more efficient (see Figure 1).
In the full virtualization scheme, the hypervisor must emulate device hardware, which is emulating at the lowest level of the conversation (for example, to a network driver). Although the emulation is clean at this abstraction, it's also the most inefficient and highly complicated. In the paravirtualization scheme, the guest and the hypervisor can work cooperatively to make this emulation efficient. The downside to the paravirtualization approach is that the operating system is aware that it's being virtualized and requires modifications to work.
Figure 1. Device emulation in full virtualization and paravirtualization environments
Hardware continues to change with virtualization. New processors incorporate advanced instructions to make guest operating systems and hypervisor transitions more efficient. And hardware continues to change for input/output (I/O) virtualization, as well (see Resources to learn about Peripheral Controller Interconnect [PCI] passthrough and single- and multi-root I/O virtualization).
But in traditional full virtualization
environments, the hypervisor must trap these requests, and then emulate
the behaviors of real hardware. Although doing so provides the greatest
flexibility (namely, running an unmodified operating system), it does
introduce inefficiency (see the left side of
Figure 1). The right side of
Figure 1 shows the paravirtualization case. Here, the
guest operating system is aware that it's running on a hypervisor and
includes drivers that act as the front end. The hypervisor implements the
back-end drivers for the particular device emulation. These front-end and
back-end drivers are where
virtio comes in,
providing a standardized interface for the development of emulated device
access to propagate code reuse and increase efficiency.
An abstraction for Linux guests
From the previous section, you can see that
virtio is an abstraction for a set of common
emulated devices in a paravirtualized hypervisor. This design allows the
hypervisor to export a common set of emulated devices and make them
available through a common application programming interface (API).
Figure 2 illustrates why this is important. With
paravirtualized hypervisors, the guests implement a common set of
interfaces, with the particular device emulation behind a set of back-end
drivers. The back-end drivers need not be common as long as they implement
the required behaviors of the front end.
Figure 2. Driver abstractions with virtio
Note that in reality (though not required), the device emulation occurs in user space using QEMU, so the back-end drivers communicate into the user space of the hypervisor to facilitate I/O through QEMU. QEMU is a system emulator that, in addition to providing a guest operating system virtualization platform, provides emulation of an entire system (PCI host controller, disk, network, video hardware, USB controller, and other hardware elements).
virtio API relies on a simple buffer
abstraction to encapsulate the command and data needs of the guest. Let's
look at the internals of the
virtio API and its
In addition to the front-end drivers (implemented in the guest operating
system) and the back-end drivers (implemented in the hypervisor),
virtio defines two layers to support
guest-to-hypervisor communication. At the top level (called virtio)
is the virtual queue interface that conceptually attaches front-end
drivers to back-end drivers. Drivers can use zero or more queues,
depending on their need. For example, the
virtio network driver uses two virtual queues
(one for receive and one for transmit), where the
virtio block driver uses only one. Virtual
queues, being virtual, are actually implemented as rings to traverse the
guest-to-hypervisor transition. But this could be implemented any way, as
long as both the guest and hypervisor implement it in the same way.
Figure 3. High-level architecture of the virtio framework
As shown in Figure 3, five front-end drivers are listed for block devices (such as disks), network devices, PCI emulation, a balloon driver (for dynamically managing guest memory usage), and a console driver. Each front-end driver has a corresponding back-end driver in the hypervisor.
From the perspective of the guest, an object hierarchy is defined as
shown in Figure 4. At the top is the
virtio_driver, which represents the front-end
driver in the guest. Devices that match this driver are encapsulated by
virtio_device (a representation of the
device in the guest). This refers to the
virtio_config_ops structure (which defines the
operations for configuring the
virtio_device is referred to by the
virtqueue (which includes a reference to the
virtio_device to which it serves). Finally,
virtqueue object references the
virtqueue_ops object, which defines the
underlying queue operations for dealing with the hypervisor driver.
Although the queue operations are the core of the
virtio API, I provide a brief discussion of
discovery, and then explore the
operations in more detail.
Figure 4. Object hierarchy of the virtio front end
The process begins with the creation of a
virtio_driver and subsequent registration via
virtio_driver structure defines the upper-level
device driver, list of device IDs that the driver supports, a features
table (dependent upon the device type), and a list of callback functions.
When the hypervisor identifies the presence of a new device that matches a
device ID in the device list, the
function is called (provided in the
virtio_driver object) to pass up the
virtio_device object. This object is cached
with the management data for the device (in a driver-dependent way).
Depending on the driver type, the
virtio_config_ops functions may be invoked to
get or set options specific to the device (for example, getting the
Read/Write status of the disk for a
device or setting the block size of the block device).
Note that the
virtio_device includes no reference to the
virtqueue (but the
virtqueue does reference the
virtio_device). To identify the
virtqueues that associate with this
virtio_device, you use the
virtio_config_ops object with the
find_vq function. This object returns the
virtual queues associated with this
virtio_device instance. The
find_vq function also permits the specification
of a callback function for the
virtqueue structure in
Figure 4), which is used to notify the guest of
response buffers from the hypervisor.
virtqueue is a simple structure that
identifies an optional callback function (which is called when the
hypervisor consumes the buffers), a reference to the
virtio_device, a reference to the
virtqueue operations, and a special
priv reference that refers to the underlying
implementation to use. Although the
optional, it's possible to enable or disable callbacks dynamically.
But the core of this hierarchy is the
virtqueue_ops, which defines how commands and
data are moved between the guest and the hypervisor. Let's first explore
the object that is added or removed from the
Guest (front-end) drivers communicate with hypervisor (back-end) drivers through buffers. For an I/O, the guest provides one or more buffers representing the request. For example, you could provide three buffers, with the first representing a Read request and the subsequent two buffers representing the response data. Internally, this configuration is represented as a scatter-gather list (with each entry in the list representing an address and a length).
Linking the guest driver and hypervisor driver occurs through the
virtio_device and most commonly through
virtqueue supports its own API consisting of
five functions. You use the first function,
add_buf, to provide a request to the
hypervisor. This request is in the form of the scatter-gather list
discussed previously. To
add_buf, the guest
virtqueue to which the request is
to be enqueued, the scatter-gather list (an array of addresses and
lengths), the number of buffers that serve as out entries (destined for
the underlying hypervisor), and the number of in entries (for which the
hypervisor will store data and return to the guest). When a request has
been made to the hypervisor through
the guest can notify the hypervisor of the new request using the
kick function. For best performance, the guest
should load as many buffers as possible onto the
virtqueue before notifying through
Responses from the hypervisor occur through the
get_buf function. The guest can poll simply by
calling this function or wait for notification through the provided
virtqueue callback function. When the guest
learns that buffers are available, the call to
get_buf returns the completed buffers.
The final two functions in the
virtqueue API are
disable_cb. You can use these functions to
enable and disable the callback process (via the
callback function initialized in the
virtqueue through the
find_vq function). Note that the callback
function and the hypervisor are in separate address spaces, so the call
occurs through an indirect hypervisor call (such as
The format, order, and contents of the buffers are meaningful only to the front-end and back-end drivers. The internal transport (rings in the current implementation) move only buffers and have no knowledge of their internal representation.
Example virtio drivers
You can find the source to the various front-end drivers within the
./drivers subdirectory of the Linux kernel. The
virtio network driver can be found in
./drivers/net/virtio_net.c, and the
block driver can be found in ./drivers/block/virtio_blk.c. The
subdirectory ./drivers/virtio provides the implementation of the
virtio device, driver,
virtqueue, and ring).
virtio has also been used in High-Performance
Computing (HPC) research to develop inter-virtual machine (VM)
communications through shared memory passing. Specifically, this was
implemented through a virtualized PCI interface using the
virtio PCI driver. You can learn more about
this work in the Resources section.
You can exercise this paravirtualization infrastructure today in the Linux
kernel. All you need is a kernel to act as the hypervisor, a guest kernel,
and QEMU for device emulation. You can use either KVM (a module that
exists in the host kernel) or with Rusty Russell's
lguest (a modified Linux guest kernel). Both of
these virtualization solutions support
(along with QEMU for system emulation and
libvirt for virtualization management).
The result of Rusty's work is a simpler code base for paravirtualized
drivers and faster emulation of virtual devices. But even more important,
virtio has been found to provide better
performance (2-3 times for network I/O) than current commercial solutions.
This performance boost comes at a cost, but it's well worth it if Linux is
your hypervisor and guest.
Although you may never develop front-end or back-end drivers for
virtio, it implements an interesting
architecture and is worth understanding in more detail.
virtio opens up new opportunities for
efficiency in paravirtualized I/O environments while building from
previous work in Xen. Linux continues to prove itself as a production
hypervisor and a research platform for new virtualization technologies.
virtio is yet another example of the strengths
and openness of Linux as a hypervisor.
- One of the best resources for deep
technical details of
virtiois Rusty Russell's "Virtio: towards a de factor standard for virtual I/O devices." This paper provides a very thorough treatment of
virtioand its internals.
- This article touched on a two virtualization mechanisms: full virtualization and paravirtualization. To learn more about the variety of virtualization mechanisms in Linux, check out Tim's article "Virtual Linux" (developerworks, December 2006).
- The key behind
virtiois exploiting paravirtualization to improve overall I/O performance. To learn more about the role of Linux as a hypervisor and for device emulation, check out Tim's articles "Anatomy of a Linux hypervisor" (developerWorks, May 2009) and "Linux virtualization and PCI passthrough" (developerworks, October 2009).
- This article touched on device emulation, and one of the most important applications that provides this functionality is QEMU (a system emulator). You can read more about QEMU in Tim's article "System emulation with QEMU" (developerWorks, September 2007).
- Xen also includes the concept of paravirtualized drivers. Paravirtual Windows Drivers discusses both paravirtualization and also hardware-assisted virtualization (HVM) in particular.
- One of the most important benefits of
virtiois performance in paravirtualized environments. This blog post from btm.geek shows the performance advantage of
- This article touched on the intersection
libvirt(an open virtualization API) and the
virtioframework. The libvirt wiki shows how to specify
- This article discussed two hypervisor
solutions that take advantage of the
virtioframework: lguest is an x86 hypervisor, also developed by Rusty Russell, and KVM is another Linux-based hypervisor that was first built into the Linux kernel.
- One interesting use of
virtiowas the development of shared-memory message passing to allow VMs to communicate with one another through the hypervisor, as described in this paper from SpringerLink.
- In the developerWorks Linux zone, find more resources for Linux developers, and scan our most popular articles and tutorials.
- See all Linux tutorials and Linux tips on developerWorks.
- Stay current with developerWorks technical events and Webcasts.
- Follow developerWorks on Twitter.
Get products and technologies
- With IBM trial software, available for download directly from developerWorks, build your next development project on Linux.
- Get involved in the My developerWorks community. Connect with other developerWorks users while exploring the developer-driven blogs, forums, groups, and wikis.
Dig deeper into Linux on developerWorks
Get samples, articles, product docs, and community resources to help build, deploy, and manage your cloud apps.
Experiment with new directions in software development.
Software development in the cloud. Register today to create a project.
Evaluate IBM software and solutions, and transform challenges into opportunities.