In this article, learn to:
- Mount and unmount filesystems manually
- Configure filesystem mounting on bootup
- Configure user-mountable, removable filesystems such as tape drives, external USB drives, floppies, and CDs or DVDs
This article helps you prepare for Objective 104.3 in Topic 104 of the Linux Professional Institute's Junior Level Administration (LPIC-1) exam 101. The objective has a weight of 3.
To get the most from the articles in this series, you should have a basic knowledge of Linux and a working Linux system on which you can practice the commands covered in this article. Unless otherwise noted, the examples in this article use Fedora 13, with a 2.6.34 kernel. Your results on other systems may differ. Sometimes different versions of a program will format output differently, so your results may not always look exactly like the listings and figures shown here.
You should also be familiar with the material in our article, "Learn Linux 101: Create partitions and filesystems."
The Linux filesystem is one big tree rooted at /, and yet we have filesystems on different devices and partitions. How do we resolve this apparent incongruity? The root (/) filesystem is mounted as part of the initialization process. Each of the other filesystems that you create is not usable by your Linux system until it is mounted at a mount point.
In the current set of mounted filesystems, a mount point is simply a directory where the filesystem on a device is grafted into the tree. Mounting is the process of making the filesystem on the device accessible. For example, you might mount filesystems on hard drive partitions as /boot, /tmp, or /home, and you might mount the filesystem on a floppy drive as /mnt/floppy and the filesystem on a CD-ROM as /media/cdrom1. As you can see, mount points may be in the root directory, or in a subdirectory farther down the tree.
Besides filesystems on partitions, floppy disks, and CDs, there are other types of filesystems. The tmpfs filesystem is a virtual memory filesystem. You can also mount filesystems from one system on another system using a networked filesystem such as NFS or AFS. You can even create a file in an existing filesystem and format that as a, possibly different, kind of filesystem and mount that too. This is often done with images of optical media, where you perhaps download an ISO CD or DVD image, then mount that file rather than burning it to real media. Swap space in a file rather than a dedicated swap partition is another example.
While the mount process actually mounts the filesystem on some device (or other resource), it is common to simply say that you "mount the device," which is understood to mean "mount the filesystem on the device."
Mounting and unmounting filesystems usually requires root authority. If you
are logged in as an ordinary user, you will either use
su - to switch to root or
sudo. In our examples, when the command prompt
ends with #, as in Listing 1 below, you will need root authority.
The basic form of the
mount command takes two
parameters: the device (or other resource) containing the filesystem to be
mounted, and the mount point. For example, we mount our FAT32 partition
/dev/sda9 at the mount point /dos as shown in Listing 1.
Listing 1. Mounting /dos
[root@echidna ~]# mount /dev/sda9 /dos
The mount point must exist before you mount anything over it. If it does not, you will get an error and need to create the mount point or use a different mount point as illustrated in Listing 2.
Listing 2. Mount error
[root@echidna ~]# mount /dev/sda9 /dos mount: mount point /dos does not exist [root@echidna ~]# mkdir /dos [root@echidna ~]# mount /dev/sda9 /dos
When you mount a filesystem over an existing directory, the files on the filesystem you are mounting become the files and subdirectories of the mount point. If the mount point directory already contained files or subdirectories, they are not lost, but are no longer visible until the mounted filesystem is unmounted, at which point they become visible again. It is a good idea to avoid this problem by using only empty directories as mount points.
After mounting a filesystem, any files or directories created or copied to the mount point or any directory below it will be created on the mounted filesystem. So a file such as /dos/sampdir/file.txt will be created on the FAT32 filesystem that we mounted at /dos in our example.
mount command will automatically
detect the type of filesystem being mounted. Occasionally you may need to
specify the filesystem type explicitly using the
-t option as shown in Listing 3.
Listing 3. Mounting with explicit filesystem type
[root@echidna ~]# mount -t vfat /dev/sda9 /dos
To see what filesystems are mounted, use the
mount command with no parameters. Listing 4
shows our example system. Note that you do not need root authority to
simply list mounted filesystems.
Listing 4. Displaying mounted filesystems
[ian@echidna ~]$ mount /dev/sda6 on / type ext4 (rw) proc on /proc type proc (rw) sysfs on /sys type sysfs (rw) devpts on /dev/pts type devpts (rw,gid=5,mode=620) tmpfs on /dev/shm type tmpfs (rw,rootcontext="system_u:object_r:tmpfs_t:s0") /dev/sda2 on /grubfile type ext3 (rw) none on /proc/sys/fs/binfmt_misc type binfmt_misc (rw) sunrpc on /var/lib/nfs/rpc_pipefs type rpc_pipefs (rw) gvfs-fuse-daemon on /home/ian/.gvfs type fuse.gvfs-fuse-daemon (rw,nosuid,nodev,user=ian) dw.raleigh.ibm.com:/vol/vol1/dwcontent on /mnt/dwcontent type nfs (rw,addr=18.104.22.168) /dev/sdb9 on /mnt/sdb9 type ext3 (rw) /dev/sda9 on /dos type vfat (rw) /dev/sr0 on /media/KNOPPIX type iso9660 (ro,nosuid,nodev,uhelper=udisks,uid=1000,gid=1000 ,iocharset=utf8,mode=0400,dmode=0500)
You can also view similar information by displaying /proc/mounts or /etc/mtab, both of which contain information about mounted filesystems.
mount command has several options that
override the default behavior. For example, you can mount a filesystem
read-only by specifying
-o ro. If the
filesystem is already mounted, add
shown in Listing 5.
Listing 5. Remounting read-only
[root@echidna ~]# mount -o remount,ro /dos
- Separate multiple options, such as
ro, with commas.
- When remounting an already mounted filesystem, it suffices to specify either the mount point or the device name. It is not necessary to specify both.
- You cannot mount a read-only filesystem as read-write. Media that cannot be modified, such as CD-ROM discs, will automatically be mounted read-only.
- To remount a writable device read-write, specify
Remount commands will not complete successfully if any process has open files or directories in the filesystem being remounted. See Unmounting filesystems below for additional information.
Labels, UUIDs, and links
In UNIX and early Linux systems, the /dev directory usually contained
entries for all the devices that might ever be attached to a system. Any
device that was used was always located in the same place in the /dev
tree, so using names such as /dev/sda6 was natural. With the advent of
hot-plugging of devices such as USB or Firewire (IEEE 1394) attached
devices, a given device might appear in one USB port today, and that same
device might be plugged into a different USB port tomorrow. In this
environment, you might want to always mount your USB stick at
/media/myusbstick, regardless of which USB port you plug it in to. In the
article for topic 102, "Learn Linux, 101: Boot managers," you learned about using labels
and UUIDs (Universally Unique IDs) instead of device names to identify
partitions. If the filesystem on the partition supports either, you can
use these with the
mount command too. Use the
blkid command to find out the UUID and label
(if present) associated with a device. Listing 6 shows how to use
blkid to find the label and UUID for our root
partition and then how to create two additional mount points and mount the
root partition at these two additional points. This example is for
illustration. You would not normally do this in a production environment.
Listing 6. Mount using labels or UUIDs
[root@echidna ~]# blkid /dev/sda6 /dev/sda6: LABEL="Fedora-13-x86_64" UUID="082fb0d5-a5db-41d1-ae04-6e9af3ba15f7" TYPE="ext4" [root@echidna ~]# mkdir /mnt/sda6label [root@echidna ~]# mkdir /mnt/sda6uuid [root@echidna ~]# mount LABEL="Fedora-13-x86_64" /mnt/sda6label [root@echidna ~]# mount UUID="082fb0d5-a5db-41d1-ae04-6e9af3ba15f7" /mnt/sda6uui
With the advent of udev, you will usually find additional symbolic links in the /dev directory for devices such as hard drives. Listing 7 shows the links to /dev/sda6 on my Fedora 13 system.
Listing 7. Symbolic links to /dev/sda6
[ian@echidna ~]$ find /dev -lname "*sda6" /dev/disk/by-label/Fedora-13-x86_64 /dev/disk/by-uuid/082fb0d5-a5db-41d1-ae04-6e9af3ba15f7 /dev/disk/by-path/pci-0000:00:1f.2-scsi-0:0:0:0-part6 /dev/disk/by-id/wwn-0x50014ee001a8d027-part6 /dev/disk/by-id/scsi-SATA_WDC_WD1001FALS-_WD-WMATV3772868-part6 /dev/disk/by-id/ata-WDC_WD1001FALS-00J7B1_WD-WMATV3772868-part6 /dev/block/8:6
You can also use a symbolic link as another way of specifying the device name when mounting a device.
Boot time and fstab
In the article for topic 102, "Learn Linux, 101: Boot managers," you learned how to use the
root= parameter in both GRUB and LILO to tell
the boot loader what filesystem should be mounted as root. Once this
filesystem is mounted, the initialization process runs
mount with the
option to automatically mount a set of filesystems. The set is specified
in the file /etc/fstab. Listing 8 shows /etc/fstab for a sample Fedora 13
system. In this example, all hard drive partitions are identified by UUID.
Listing 9 shows a different example from an Ubuntu 9.10 system.
Listing 8. Example Fedora 13 fstab
# # /etc/fstab # Created by anaconda on Fri May 28 12:37:05 2010 # # Accessible filesystems, by reference, are maintained under '/dev/disk' # See man pages fstab(5), findfs(8), mount(8) and/or blkid(8) for more info # UUID=082fb0d5-a5db-41d1-ae04-6e9af3ba15f7 / ext4 defaults 1 1 UUID=488edd62-6614-4127-812d-cbf58eca85e9 /grubfile ext3 defaults 1 2 UUID=2d4f10a6-be57-4e1d-92ef-424355bd4b39 swap swap defaults 0 0 UUID=ba38c08d-a9e7-46b2-8890-0acda004c510 swap swap defaults 0 0 tmpfs /dev/shm tmpfs defaults 0 0 devpts /dev/pts devpts gid=5,mode=620 0 0 sysfs /sys sysfs defaults 0 0 proc /proc proc defaults 0 0
Listing 9. Example Ubuntu 9.10 fstab
# /etc/fstab: static file system information. # # Use 'blkid -o value -s UUID' to print the universally unique identifier # for a device; this may be used with UUID= as a more robust way to name # devices that works even if disks are added and removed. See fstab(5). # # <file system> <mount point> <type> <options> <dump> <pass> proc /proc proc defaults 0 0 # / was on /dev/sda7 during installation UUID=8954fa66-e11f-42dc-91f0-b4aa480fa103 / ext3 errors=remount-ro 0 1 # /grubfile was on /dev/sda2 during installation UUID=3a965842-b6dd-4d52-8830-2d0fdb4284a2 /grubfile ext3 defaults 0 2 /dev/sda5 none swap sw 0 0 /dev/scd0 /media/cdrom0 udf,iso9660 user,noauto,exec,utf8 0 0 /dev/fd0 /media/floppy0 auto rw,user,noauto,exec,utf8 0 0
Lines starting with a # character are comments. Remaining lines contain six fields. Because the fields are positional, they must all be specified.
- file system
- This may be a device name such as /dev/sda1, or a label (LABEL=) or UUID (UUID=). For the root filesystem of our Fedora 13 example, it could be /dev/sda6, LABEL="Fedora-13-x86_64", or UUID="082fb0d5-a5db-41d1-ae04-6e9af3ba15f7". Using a label or UUID makes your system more robust when devices are added or removed.
- mount point
- This is the mount point we discussed in Mounting filesystems above. For swap space, this should be the value 'none' or 'swap'. On older systems you will usually find the value 'none'.
- Specifies the type of filesystem. CD/DVD drives will often support
either ISO9660 or UDF filesystems, so you may specify multiple
possibilities in a comma-separated list as you see in Listing 9. If
mountto automatically determine the type, specify
autoas is done in the last line of Listing 9 for the floppy drive.
- Specifies the mount options. Specify
defaultsif you want default mount options. Some options you will want to know about are:
rospecify whether the filesystem should be mounted read-write or read-only.
noautospecifies that this filesystem should not be automatically mounted at boot time or whenever
mount -ais issued. In our example, this is done for the removable drives.
userspecifies that a non-root user is permitted to mount and unmount the filesystem. This is especially useful for removable media. In older systems, this option is specified in /etc/fstab rather than on the
mountcommand. With newer systems, it may be specified in udev rules that are located in rules files within /lib/udev/rules.d or /etc/udev/rules.d. The options for the DVD drive on my Fedora 13 system come from udev rules, and that is why there is no entry in /etc/fstab for an optical drive.
noexecspecify whether or not to allow execution of files from the mounted filesystem. User-mounted filesystems default to
execis specified after
noatimewill disable recording of access times. Not using access times may improve performance.
- Specifies whether the
dumpcommand should consider this ext2 or ext3 filesystem for backups. A value of 0 tells
dumpto ignore this filesystem.
- Non-zero values of pass specify the order of checking filesystems at boot time, as discussed in our article "Learn Linux, 101: Maintain the integrity of filesystems."
When you mount a filesystems that is listed in /etc/fstab, you can give either the device name or the mount point when mounting the filesystem. You do not need to give both.
On some systems, for example SUSE 11.2, you may find that the
generated at install time uses symbolic links to the device. So, you may
rather than /dev/sda6 for the file system value.
Consult the man pages for
additional information, including options not covered here.
All mounted filesystems are usually unmounted automatically by the system when it is rebooted or shut down. When a filesystem is unmounted, any cached filesystem data in memory is flushed to the disk.
You may also unmount filesystems manually. Indeed, you should do this when removing writable media such as diskettes or USB drives or memory keys.
umount command to unmount the
filesystem, specifying either the device name or mount point as
an argument. Listing 10 shows how to unmount /dos, then remount it and
unmount again using the device name.
Listing 10. Unmounting filesystems
[root@echidna ~]# umount /dos [root@echidna ~]# mount /dev/sda9 /dos [root@echidna ~]# umount /dev/sda9
After a filesystem is unmounted, any files in the directory used for the mount point are visible again.
If you attempt to unmount a filesystem while a process has open files on
that filesystem, you will see an error message. Before unmounting a
filesystem, you should check that there are no processes running that have
open files on the filesystem. Use the
fusercommand to determine what files are open
or what process has open files. You may need the
-w option on
avoid warning messages related to the Gnome Virtual File system (gvfs).
Check the man pages to learn about additional mount options and
lsof. If you are checking a whole device, you
can specify the device name or the mount point. You may also check whether
an individual file is in use or not.
To illustrate these commands, I created a copy of /etc/fstab on /dos and a
small script to read lines from stdin and print them to stdout with a 10
second pause between each line. Listing 11 shows the error message from
umount when files are in use and the use of
check for open files on /dos, or the underlying device /dev/sda9.
Listing 11. Checking for open files
[root@echidna ~]# umount /dos umount: /dos: device is busy. (In some cases useful info about processes that use the device is found by lsof(8) or fuser(1)) [root@echidna ~]# lsof -w /dos COMMAND PID USER FD TYPE DEVICE SIZE/OFF NODE NAME slowread. 2560 ian 0r REG 8,9 899 123 /dos/fstab sleep 2580 ian 0r REG 8,9 899 123 /dos/fstab [root@echidna ~]# lsof -w /dev/sda9 COMMAND PID USER FD TYPE DEVICE SIZE/OFF NODE NAME slowread. 2560 ian 0r REG 8,9 899 123 /dos/fstab sleep 2580 ian 0r REG 8,9 899 123 /dos/fstab [root@echidna ~]# fuser -m /dos /dos: 2560 2586 [root@echidna ~]# fuser -m /dev/sda9 /dev/sda9: 2560 2588
At this point you can either wait until the filesystem is no longer busy,
or you can do a lazy unmount, by specifying the
-l option. A lazy unmount detaches the
filesystem from the filesystem tree immediately, and cleans the references
to the filesystem when it is no longer busy.
We mentioned some issues with removable devices such as USB or Firewire
(IEEE 1394) attached devices. It is inconvenient to switch to root access
every time you need to mount or unmount such a device. The same goes for
CD, DVD, and floppy drives, where you need to unmount the device to change
media. In the discussion of
fstab above, we mentioned the
user option, which allows ordinary users to
mount and unmount devices. Listing 9 shows one way to code
for a floppy drive or for a CD or DVD drive.
Note that the filesystem types for the optical drive are specified as
udf,iso9660, while the filesystem type for the
floppy is specified as
auto. For the optical
drive, the mount process will check first for a udf filesystem (common on
DVD) and then for an iso9660 filesystem (common on CD). For the floppy
drive, the mount process will probe for a filesystem type. You can create
or edit /etc/filesystems to change the order in which the filesystems will
Note: You should always unmount removable drives or media before disconnecting the drive or attempting to remove the media. Failure to do so may result in loss of data that has not yet been written to the device.
If you run a graphical desktop such as Nautilus, you will usually find
options that allow removable devices and media to be automatically
mounted. For example, if I insert a Knoppix DVD into the DVD drive of my
system, I might see a mount entry such as shown in Listing 12. The presence
of 'uid=1000' shows that the user with id 1000 can unmount this disc. The
id command shows the uid for user ian is 1000,
so ian can unmount this disc.
Listing 12. Desktop mounting of DVD
[ian@echidna ~]$ mount | grep sr0 /dev/sr0 on /media/KNOPPIX type iso9660 (ro,nosuid,nodev,uhelper=udisks, uid=1000,gid=1000,iocharset=utf8,mode=0400,dmode=0500) [ian@echidna ~]$ id ian uid=1000(ian) gid=1000(ian) groups=1000(ian)
You may also use the
eject command to eject
removable media when the drive supports the operation as most CD and DVD
drives do. If you have not unmounted the device first, then
eject will both unmount and eject the disc.
You may have noticed in the discussion of
above that swap space does not have a mount point. The boot process
usually enables swap space defined in /etc/fstab unless the
noauto option is specified. To manually control
swap space on a running system—for example, if you added a new swap
swapoff commands. See the man pages for
You can view the currently enabled swap devices with
cat /proc/swaps or with
swapon -s as shown in Listing 13.
Listing 13. Displaying swap space
[ian@echidna ~]$ swapon -s Filename Type Size Used Priority /dev/sdb1 partition 514044 0 -1 /dev/sdb5 partition 4192928 0 -2 [ian@echidna ~]$ cat /proc/swaps Filename Type Size Used Priority /dev/sdb1 partition 514044 0 -1 /dev/sdb5 partition 4192928 0 -2
This completes your introduction to device mounting on Linux.
- Use the developerWorks roadmap for LPIC-1 to find the developerWorks articles to help you study for LPIC-1 certification based on the April 2009 objectives.
- At the LPIC Program site, find detailed objectives, task lists, and sample questions for the three levels of the Linux Professional Institute's Linux system administration certification. In particular, see their April 2009 objectives for LPI exam 101 and LPI exam 102. Always refer to the LPIC Program site for the latest objectives.
- Review the entire LPI exam prep series on developerWorks to learn Linux fundamentals and prepare for system administrator certification based on earlier LPI exam objectives prior to April 2009.
- The Linux Documentation Project has a variety of useful documents, especially its HOWTOs.
- In the developerWorks Linux zone, find hundreds of how-to articles and tutorials, as well as downloads, discussion forums, and a wealth of other resources for Linux developers and administrators.
- Stay current with developerWorks technical events and webcasts focused on a variety of IBM products and IT industry topics.
- Attend a free developerWorks Live! briefing to get up-to-speed quickly on IBM products and tools, as well as IT industry trends.
- Watch developerWorks on-demand demos ranging from product installation and setup demos for beginners, to advanced functionality for experienced developers.
- Follow developerWorks on Twitter, or subscribe to a feed of Linux tweets on developerWorks.
Get products and technologies
- Evaluate IBM products in the way that suits you best: Download a product trial, try a product online, use a product in a cloud environment, or spend a few hours in the SOA Sandbox learning how to implement Service Oriented Architecture efficiently.
- Participate in the discussion forum.
- Get involved in the My developerWorks community. Connect with other developerWorks users while exploring the developer-driven blogs, forums, groups, and wikis.
Dig deeper into Linux on developerWorks
Get samples, articles, product docs, and community resources to help build, deploy, and manage your cloud apps.
Experiment with new directions in software development.
Software development in the cloud. Register today to create a project.
Evaluate IBM software and solutions, and transform challenges into opportunities.