The Domain Name System (DNS) is a hierarchical naming system built on a distributed database for computers, services, or any resource connected to the Internet or a private network.
Systems Director Navigator for i is a powerful graphical interface for Windows clients. A master DNS server can be moved to a different system with just a few steps using Systems Director Navigator for i.
First, several important DNS concepts used in this article will be introduced.
There are two types of DNS - master DNS and slave DNS. In general, domain names can work with only one name server - the master DNS. However, practice has shown that a domain name needs to have at least two name servers assigned in order to be available at any time. In case there is a problem with the master name server, the slave name server will be able to answer the online request for a particular domain. This back-up requirement has turned into an accepted Internet standard that prevents domain names from going offline.
Zones and zone files
Zone files contain Resource Records that describe a domain or sub-domain. The format of zone files is an IETF standard defined by RFC 1035. A zone file will mainly include the following types of records:
SOA(Start of Authority): An
SOArecord specifies the DNS server providing authoritative information about an Internet domain, the email of the domain administrator, the domain serial number, and several timers relating to refreshing the zone.
NS(Name Server): An
NSrecord maps a domain name to a list of DNS servers authoritative for that domain. Delegations depend on
A: IPv4 address record.
AAAA: IPv6 address record.
CNAME(Canonical Name): A
CNAMErecord makes one domain name an alias of another. The aliased domain gets all the sub-domains and DNS records of the original domain.
MX(Mail Exchange): An
MXrecord maps a domain name to a list of mail exchange servers for that domain.
PTRrecord maps an IPv4 address to the canonical name for that host.
TXTrecord allows an administrator to insert arbitrary text into a DNS record.
NS records are very
important and used in the following method to move a master name server to
a different system.
Listing 1. Example zone file
example.com. IN SOA ns.example.com. hostmaster.example.com. ( 2003080800 ; sn = serial number 172800 ; ref = refresh = 2d 900 ; ret = update retry = 15m 604800 ; ex = expiry = 1w 3600 ; min = minimum = 1h ) IN NS ns.example.com. IN NS ns1.example.com.
The above example zone file indicates that the ns.example.com is the master authoritative server for the domain example.com. The slave authoritative server 'ns1' will attempt to get a copy of the file every two days and will retry once every 15 minutes until it can successfully retrieve the db.example.com zone file. If 'ns1' is unable to reach the master authoritative server to download the zone in 1 week, it will no longer provide the answers contained in this zone. 'ns1' will be kept in the cache for 1 hour.
Moving a master DNS name server to a different system
Note: Assuming there are two systems, the first system/machine is running the original master DNS server. The second system/machine will run the new master DNS server.
Step 1. Create a new DNS server
The basic process to move a master name server to the second system is to create a new DNS server on the second machine and import DB files from the current master DNS name server DB.
Step 1.1. On the Systems Director Navigator for i home page, click item Network under the IBM i Management navigation pane, then select All Tasks from the expanded options, or select Show All Network Tasks from the networking options displayed on the welcome page.
Figure 1. Systems Director Navigator for i main menu (1)
Step 1.2. In IBM i Navigator Tasks, click on the action arrow for Servers, and then select Create DNS Server to open the New DNS Name Server Configuration wizard.
Figure 2. Create DNS server
Step 1.3. Fill in the DNS server name (must be unique).
Figure 3. Fill in the DNS server name
Step 1.4. Select the IP addresses on which the name server will listen for queries. In this case, All IP addresses is selected so the DNS server will listen on all IP addresses.
Figure 4. Listen on IP addresses
Step 1.5. Add root name servers by clicking Internet Roots. A root name server is a name server for the Domain Name System's root zone. It directly answers requests for records in the root zone and answers other requests returning a list of the designated authoritative name servers for the appropriate top-level domain (TLD). Usually, the user will not need to perform any additional configuration for the root name servers, but can add other root name servers by clicking on Add and inputting the root name server information or using the Import button to select a file containing other root name servers. Follow the wizard prompts to take the defaults for the remaining DNS name server configuration.
Figure 5. Root servers
Step 1.6. After finishing all of the above steps, click Finish on the Summary page of the wizard. The wizard will indicate the new DNS server has been created successfully.
Step 2. Import zone database files
It is recommended to stop the related DNS server until the importing process finishes to ensure the integrity of the imported DB files.
Step 2.1. Transfer associated DB files from the master DNS
name server on the first machine to the new DNS server that was just
created on the second machine using FTP or other file transfer methods.
The DB files are located at /qibm/UserData/OS400/DNS/yourDNS/ on
the first machine. The DB files can be stored in a temporary folder on the
second machine. In this example, there is only one DB file (test.com.db)
transferred from folder chen.
Note:yourDNS is not the actual folder name. The folder name should be the same as the name of the master DNS name server.
Step 2.2. Go back to the Systems Director Navigator for i home page, and select Network under the IBM i Management navigation pane. Then select DNS Servers from the expanded options, or from the networking options displayed on the welcome page.
Figure 6. System Director Navigator for i main menu (2)
Step 2.3. Click on the action arrow for the name server just created, and select Configuration.
Figure 7. DNS server list
Step 2.4. In the DNS Configuration main menu, click on the action arrow for the File option, and then select Import Zone to open the Import Zone wizard.
Figure 8. DNS configuration main menu (1)
Step 2.5. In the top left corner of the menu is a folder tree window, as shown in Figure 10. Find the folder which stores the zone files, and then click the file to be imported. The file name should be displayed in the filename box in the bottom left corner of window. Make sure it is the correct file, and then click File Open.
Figure 9. File open
Step 2.6. Fill in the fully qualified domain name (FQDN) field, which should match the zone name in the import zone DB file. In this case, the FQDN is test.com.
Figure 10. Fill in the fully qualified domain name
Step 2.7. Select an update method for the new DNS server. Static updates require an administrator to update a configuration file. Dynamic updates allow an authorized host or application, such as DHCP, to update a configuration file. Normally, this method will be the same as it was on the original master name server, in case any exception happens during zone promotion. In this example, the selected method is static updates.
Figure 11. Select the method to update DNS
Step 2.8. After finishing all of the above steps, click Finish on the Summary page of the wizard. The wizard will indicate the zone file has been imported successfully.
Step 2.9. If there are more DB files to import, repeat steps 2.4-2.7 until all needed DB files have been imported.
Step 3. Update the SOA and NS records in the zone files on the new DNS server
After importing the zone files, change the
SOA from previous
master server to the current host, and delete the previous master server
NS records. In this case, change the
NS records from
lp15ut9 is the original master
name server and
lp16ut9 is the new DNS server.
Figure 12. Original SOA and NS records
Step 3.1. In the DNS Configuration main menu, based on the zone types, click Forward Lookup Zones or Reverse Lookup Zones to select the zones to modify. In this example, the zone is test.com.
Figure 13. DNS configuration main menu (2)
Step 3.2. In the DNS Configuration main menu, click on the action arrow for the File option, and then select Properties.
Figure 14. DNS configuration main menu (3)
Step 3.3. Select Resources from the navigation pane in the Properties Configuration main menu as shown in Figure 15.
Step 3.4. Edit the
records in each zone file that was imported. Select each record, and then
click Edit to change the record value.
Figure 15. Properties configuration main menu
Step 4. Start the new DNS server
dig to verify the configuration
of the new DNS server.
Listing 2. Dig example assuming the DNS host address is 184.108.40.206
dig @220.127.116.11 chen.test.com
dig command should reply with an answer like the one shown
in Figure 18.
Figure 16. Results for dig command
Make sure the client's DNS address has been changed once the new DNS server is started. Also, be sure to update the DHCP as well if it is using DDNS.
Any slave DNS servers will need to be updated to use the new server as its master server, or add it as an additional master server, since a slave DNS server can have multiple masters for a zone. The new master server and original master server can run at the same time if the slave DNS server has added the new server as an additional master server for the zone.
This article describes a procedure to move a master DNS server to another system. Although moving a master DNS server from one system to another can be done quickly, the original master DNS server has to stopped until the database file transfer is finished. A slave DNS server can answer requests for domain names on the original master DNS to keep the domain names online while the master DNS is temporarily unavailable. Moving a master DNS server only requires a few steps using Systems Director Navigator for i and is easy for users to follow. Instead of recreating all of the zone files for the new DNS server, this procedure is a simple way to create a new DNS server using existing zone files and configuration from another master DNS server and ensure that the existing functionality of the original DNS server is replicated on the new master DNS server.
Here are some useful resources you can refer to for some detailed information mentioned in the article: