This forum provides a place for all IBM BladeCenter discussion topics. Post your IBM BladeCenter questions and comments, and share your thoughts, ideas, and solutions with other users.
Posts:
1
Registered:
Apr 26, 2006 02:13:07 PM
Solaris 10 on IBM Blade
Posted:
Apr 26, 2006 02:14:02 PM
in response to: Shelly Mikosh's post
I did have Solaris 10 on LS20 - just works, no problems.
We did have some problems with Solaris 10 on LS21 with installation - it works now, just simple BIOS setting change is needed on blade. Then newer network driver is needed and it seems to work stable - we'll see in next few days (so far so good).
Hi, I have a problem with a BladeCenter HS21 (8853-L3U) that is installed with an SAS Storage Expansion and a ServeRaid 8k.
The server is installed in an Bladecenter Chassis (8677-3RU) with and Advanced Management Module (FW v1.25).
The HS21 has two SAS internal disks configured in raid 1 with onboard controller (SAS 1064e) and it has operating system installed in it.
In the expansion it has 2 disks configured in raid 1 with serve Raid 8k.
The problem I´m having is that the HS21 and the blade generates an alert that hard disks in expansion are removed and then it makes a recovery from this.
In serve Raid manager hard disks still optimal and access to data is avaible all time. I think is a false error.