All computer operating systems verify whether the file systems that
they mount at boot time are consistent, meaning that there are no
errors in their internal data structures and the associated
storage that they map to. UNIX, Linux®, and other UNIX-like
operating systems take a clever approach to determining whether
the consistency of a file system needs to be verified (typically by
fast command). When these systems mount a file system,
they set a value in the file system header that marks the
file system as
DIRTY, meaning that it is in use and may be
transiently inconsistent as updates are being written to it. When
file systems are unmounted as part of a system shutdown, they are
CLEAN. When the system reboots,
only file systems that are still marked as
DIRTY need to be checked
File systems are automatically unmounted as part of the system shutdown process, which usually occurs after all non-system processes have been terminated. Regardless, unmounting a file system can still fail with the traditional message:
$ sudo umount /mnt/NAS umount: /mnt/NAS: device is busy
In this case,
busy means that a process is writing to or
running from that file system. The fact that you cannot unmount a
file system in either of these cases is one of the basic rules of
computer systems. If
this were not the case, you could unmount a file system while some
process is writing to a file that it contains, which could leave
the file in an inconsistent state while the file system itself is
The standard Linux version of the
includes a lazy unmount option,
help unmount file systems that are in use. This command
requires Linux kernel version 2.4.11 or greater, which isn't much
of a problem today. Executing
umount -l /name/of/file system
detaches the specified file system from the system's directory
hierarchy so that no new processes can use the file system and
then unmounts the file system when all of the processes
that were accessing it terminate. This can be handy but is
not exactly what you want to use when you need to unmount a
file system now.
If you need to unmount a file system now, and that file system reports that it is busy, you still have some options. If you are the only user of a system, terminating the processes that are preventing you from unmounting a file system is as easy as looking through all your windows for suspended or background processes that are writing to the partition in question or using it as their current working directory and terminating them. However, on multi-user systems with many local and remote users this approach isn't practical. Luckily, the open source community offers some commands that make it easy to identify and terminate such processes.
Locating open files with
lsof (list open files) command displays a list of all open
files and the processes associated with them on a
specific file system, directory, or device. The
lsof command is
available for most UNIX and UNIX-like systems, including IBM® AIX®,
Berkeley Software Distribution (BSD®), Hewlett Packard UNIX (HP-UX®),
Linux, and Solaris®. See Resources for
information about obtaining
lsof for your system.
By default, the
lsof command lists all files, shared libraries,
and directories that are currently open and provides as much
information as possible about each of them. The output from this
is huge, even on a lightly loaded system, so you typically either
supply the name of a directory as a command-line argument or use a
pipe to filter its output. For example, suppose that you want to
unmount a file system that is mounted on the /opt2 directory. To
see all of the processes associated with the /opt2 directory, you
execute a command such as the one shown in Listing 1.
Listing 1. Processes associated with a mounted file system
$ lsof /opt2 COMMAND PID USER FD TYPE DEVICE SIZE/OFF NODE NAME bash 23334 wvh cwd DIR 8,17 4096 2 /opt2 more 23402 wvh cwd DIR 8,17 4096 2 /opt2 more 23402 wvh 3r REG 8,17 10095 264 /opt2/resume.txt
You need to terminate all of these processes before you
can unmount the /opt2 partition. Because none of the processes in
this listing can be writing any files, you could use the
command to terminate the process IDs (PIDs) that are listed in the second
column and then unmount the partition with no problems. Note that
PID 23402 is associated with the last two lines—the
first line indicates that the
more command is running with a
current working directory (
cwd) of /opt2, and the second indicates
more command has the /opt2/resume.txt file open.
However, suppose that the output of the
lsof command looks like Listing 2.
Listing 2. A different set of processes associated with a mounted file system
$ lsof /opt2 COMMAND PID USER FD TYPE DEVICE SIZE/OFF NODE NAME bash 23334 wvh cwd DIR 8,17 4096 2 /opt2 more 23402 wvh cwd DIR 8,17 4096 2 /opt2 more 23402 wvh 3r REG 8,17 10095 264 /opt2/resume.txt bash 21343 djf cwd DIR 8,17 4096 2 /opt2 emacs 21405 djf cwd DIR 8,17 4096 2 /opt2
The first three commands associated with the /opt2 directory are
the same, but the last two are being run by another user. Of
emacs command is designed for editing files, so you
might want to have the user listed in the
USER column save and exit before you terminate that process.
The previous section showed how to identify open files and directories on a local device, but you can just as easily get the same information about a mounted remote file system.
To provide a consistent set of examples for this article, all of the command and output examples refer to mounted partitions from the system shown in Listing 3.
Listing 3. File systems used in this article
$ df Filesystem 1K-blocks Used Available Use% Mounted on /dev/sda1 230528596 201462232 17356188 93% / /dev/sdb1 240362656 12533532 215619324 6% /opt2 //nas.vonhagen.org/writing 100790048 75945920 197241926 80% /mnt/NAS 192.168.6.166:/mnt/disk1 714854640 386972432 291569696 58% /mnt/yellowmachine
As shown in Listing 3, /mnt/NAS is
the mountpoint for a Samba share called writing that is shared
from the device nas.vonhagen.org. Specifying the name of the
mountpoint as an argument to the
lsof command creates output similar
to Listing 2 but specific to that device and
directory, as shown in Listing 4.
Listing 4. Processes associated with a remote file system
$ lsof /mnt/NAS COMMAND PID USER FD TYPE DEVICE SIZE NODE NAME bash 23236 wvh cwd DIR 0,27 4096 6406145 /mnt/NAS/writing \ (nas.vonhagen.org:/writing)
lsof command also provides options that enable you to restrict
its output to reporting open files and directories on specific
types of devices. For example, as shown in Listing 3, the
/mnt/yellowmachine directory is a mountpoint for a Network File System (NFS) mount of
the /mnt/disk1 directory on the 192.168.6.166 device. You can
easily supply the name of the mountpoint for this device as an
argument to the
lsof command, as shown in Listing 5.
Listing 5. Processes associated with a remote NFS file system
$ lsof /mnt/yellowmachine COMMAND PID USER FD TYPE DEVICE SIZE/OFF NODE NAME bash 23334 wvh cwd DIR 0,23 4096 2 /mnt/yellowmachine \ (192.168.6.166:/mnt/disk1)
You can also use the
-N option to list only files and directories that are in use on
NFS-mounted devices, as shown in Listing 6.
Listing 6. Processes associated with all mounted NFS partitions
$ lsof -N COMMAND PID USER FD TYPE DEVICE SIZE/OFF NODE NAME bash 23334 wvh cwd DIR 0,23 4096 2 /mnt/yellowmachine (192.168.6.166:/mnt/disk1)
lsof command has many more options that can help you
identify open files and directories on different types of
file systems, as well as the processes that have network sockets
open, who is using specific binaries, and more. The downside
lsof command is that you always have to either contact
users and ask them to terminate certain processes or manually
terminate them yourself. The
fuser command is a more
cryptic but also more powerful command that can do much of your
process termination work for you when run as the root user.
Finding user processes with
fuser (find user processes) command is another open source
application that can help identify processes that are preventing
you from unmounting file systems. The
command finds user processes that are associated with whatever
files, directories, or file system mountpoints that you supply as
command-line arguments. This article focuses on using
file system mountpoints. For more generic information about the
fuser command, see its online reference information. The
command requires that your system supports the
/proc file system. Therefore, it's available for all Linux
distributions and FreeBSD systems. See Resources for
information about obtaining the source code for the
As with the
lsof command, supplying the name of a file system
mountpoint as a command-line argument is the simplest way to use the
command to identify processes that are preventing you from
unmounting a file system:
$ fuser /mnt/yellowmachine /mnt/yellowmachine: 23334c 23697c
The output of the
fuser command simply identifies the PIDs of
processes that are using the specified mountpoint. Each PID
is followed by a single letter that identifies the way in
which the process associated with that PID is using the specified
mountpoint. The most common of these is the letter
shown in the previous example, which indicates the specified
process is using a directory on that file system as its current
Unfortunately, the default output of the
fuser command isn't
end-user friendly, even by Linux standards. The
-v option that adds some output that is similar to the output of the standard
ps command to the
output of the
fuser command, as shown in Listing 7.
Listing 7. User processes on a mounted NFS file system
$ fuser -v /mnt/yellowmachine USER PID ACCESS COMMAND /mnt/yellowmachine: wvh 23334 ..c.. bash wvh 23697 ..c.. emacs
This is handier because it at least identifies what the
processes are. After you obtain the PID information from the
command, you can always use a combination of the standard
egrep commands to get as much detail as possible about the
processes before terminating them, as shown in Listing 8.
Listing 8. Search for specific processes on a system
# ps alxww |egrep '23334|23697' 4 1000 23334 23332 20 0 18148 2076 wait Ss pts/13 0:00 -bash 0 1000 23697 23334 20 0 75964 12352 poll_s S+ pts/13 0:00 emacs -nw file2.txt 0 0 23703 23665 20 0 6060 632 - R+ pts/16 0:00 egrep 23334|23697
You can then use the standard
kill command to terminate the
specified processes manually or, as explained in the next section,
use some of the advanced capabilities of the
fuser command to
terminate them automatically.
Terminating processes with
-k option automatically terminates processes
that it detects are using a mountpoint that you specify as an
argument. You must, of course, execute the
fuser command as root
to be able to terminate processes that may be owned by other
users, as shown in Listing 9.
Listing 9. Terminating processes associated with a mounted NFS file system
# fuser -k /mnt/yellowmachine /mnt/yellowmachine: 23334c 23697c Could not kill process 23697: No such process
In this case, the second process (emacs) was a child of the first
(the bash shell), and therefore terminated when the first was
killed by the
If you want to specify the name of an underlying physical device
rather than simply the mountpoint for the file system that it
contains, you must also specify the
-m option, as shown in Listing 10.
Listing 10. Process listings for mountpoint and devices
# fuser -v /opt2 USER PID ACCESS COMMAND /opt2: wvh 23712 ..c.. bash wvh 23753 ..c.. emacs # fuser -v /dev/sdb1 # fuser -vm /dev/sdb1 USER PID ACCESS COMMAND /dev/sdb1: wvh 23712 ..c.. bash wvh 23753 ..c.. emacs
The first command returns the output that you
would expect because it references the mountpoint for a
file system. The second command shows that you cannot directly
query the underlying device by using the standard
options. The third illustrates that the
-m option enables you to
specify a device directly. You could add the
-k option to either of the first or third
commands in this example to terminate the processes in the
file system that is located on the /dev/sdb1 device.
At some point, every Linux or UNIX systems
administrator needs to unmount a partition in response to some
emergency or simply to remove a device such as a mounted CD-ROM
or DVD. When the system won't let you unmount a
device because that device is busy, examining every process on the
system is both irritating and slow. The
make it easy to identify the processes
that are preventing you from unmounting a file system. The
fuser command even terminates them for you if
you're in a hurry.
- The AIX and UNIX developerWorks zone provides a wealth of information relating to all aspects of AIX systems administration and expanding your UNIX skills.
- New to AIX and UNIX? Visit the New to AIX and UNIX page to learn more.
- Browse the technology bookstore for books on this and other technical topics.
Get products and technologies
lsofcommand is installed by default on most Linux systems, and source packages for
lsofare available in the repositories used by those distributions. The latest version of
lsofis available via anonymous File Transfer Protocol (FTP) from lsof.itap.purdue.edu in the pub/tools/unix/lsof directory. You can also get
lsoffrom an FTP URL: ftp://lsof.itap.purdue.edu/pub/tools/unix/lsof.
fusercommand is part of the PSmisc package, which also includes commands such as
The Linux Foundation provides a simple script called Forced Unmount,
fumount, that tries to automatically combine a number of passes of
fuserwith the appropriate unmount commands to forcibly unmount a specified partition.
- Check out developerWorks blogs and get involved in the developerWorks community.
- Follow developerWorks on Twitter.
- Get involved in the My developerWorks community.
- Participate in the AIX and UNIX forums:
Dig deeper into AIX and Unix on developerWorks
Get samples, articles, product docs, and community resources to help build, deploy, and manage your cloud apps.
Experiment with new directions in software development.
Software development in the cloud. Register today to create a project.
Evaluate IBM software and solutions, and transform challenges into opportunities.