Using Sendmail on AIX® may be considered a thing of the past, with all the available choices for mail servers on the market. However, Sendmail still has its uses. This article provides some tips and tricks for using Sendmail on AIX.

Chris Gibson (cg@gibsonnet.net), AIX Specialist, Southern Cross Computer Systems

author photoChris Gibson is an AIX systems specialist located in Melbourne, Australia. He is an IBM CATE, System p platform and AIX 5L, and a co-author of the IBM Redbooks publication, "NIM from A to Z in AIX 5L."


developerWorks Contributing author
        level

06 April 2010

Also available in Chinese

Introduction

Sendmail has been included with the AIX operating system for many years now. Despite its reputation for being difficult to administer, it is very powerful and can perform some interesting tricks. It's helped me overcome some challenges over the years. This article shares two interesting tricks that I discovered with Sendmail on AIX.


Some basics

Sendmail behaves a little differently on AIX compared to other UNIX® systems. So before beginning, I'll quickly review the basics.

To start the Sendmail daemon, use the startsrc command. For example:

# startsrc -s sendmail -a "-bd -q30m"

The –s flag specifies the subsystem to start, and the –a flag instructs startsrc to execute the subsystem with the specified arguments.

The -bd flag starts Sendmail as a daemon (running in the background) as a Simple Mail Transfer Protocol (SMTP) mail router. The –q flag specifies the interval at which the Sendmail daemon processes saved messages in the mail queue. In this example, Sendmail will process the mail queue every 30 minutes.

To start the Sendmail daemon automatically on a reboot, uncomment the following line in the /etc/rc.tcpip file:

# vi /etc/rc.tcpip
start /usr/lib/sendmail "$src_running" "-bd -q${qpi}"

Execute the following command to display the status of the Sendmail daemon:

# lssrc -s sendmail

To stop Sendmail, use stopsrc:

# stopsrc -s sendmail

The Sendmail configuration file is located in the /etc/mail/sendmail.cf file, and the Sendmail mail alias file is located in /etc/mail/aliases.

If you add an alias to the /etc/mail/aliases file, remember to rebuild the aliases database and run the sendmail command with the -bi flag or the /usr/sbin/newaliases command. This forces the Sendmail daemon to re-read the aliases file.

# sendmail -bi

To add a mail relay server (smart host) to the Sendmail configuration file, edit the /etc/mail/sendmail.cf file, modify the DS line, and refresh the daemon:

# vi /etc/mail/sendmail.cf
DSsmtpgateway.xyz.com.au
# refresh -s sendmail

To log Sendmail activity, place the following entry in the /etc/syslog.conf file, create the log file, and refresh the syslog daemon:

# grep mail /etc/syslog.conf
mail.debug  /var/log/maillog rotate time 7d files 4 compress
# touch /var/log/maillog
# refresh –s syslogd

Sendmail to the rescue!

There were two challenges that Sendmail helped me overcome. Both were requests from my corporate messaging team. They were unable to develop a solution to a mail routing problem using Exchange. I'm not sure what prevented them from providing a solution, but it gave me a chance to develop my Sendmail skills!

The messaging team asked if there was a way for the AIX system to forward mail, destined for a particular mail address, to a foreign SMTP mail server; that is, one they did not administer. However, the server was within the corporate network and isolated by a firewall. The servers "NAT'ed" IP address was contactable on the network. It was not an internet-connected host.

The second request was similar to the first. However, this time the messaging team needed to forward the mail to a different SMTP server on a different SMTP port; that is, not port 25, the default SMTP port.

To protect the innocent, I have changed the host and domain names in the examples that follow. The organisation's domain name will be known as xyz.com.au, and the remote SMTP server will be known as notus.com.au.


Sendmail trick 1

The first request required that mail destined for any user at notus.com.au to be redirected to the NotUs mail server. Mail would be sent from a user's desktop mail client to the following mail address: user@notus.com.au. The mail would arrive on the corporate mail server. A rule on the Exchange server would redirect the message to the AIX SMTP host (aixmta01). The Sendmail daemon, on aixmta01, would receive the message and pass it on to the notus.com.au SMTP server, where the message would finally be delivered to the user's mailbox. See Figure 1 for a diagram.

Figure 1. Mail flow from desktop to NotUs SMTP server
Flowchart showing process, beginning with users mail client and ending with notus SMTP server.

For this process to work, on the AIX server side I had to make a couple of changes to my Sendmail configuration. First, I needed to enable the mailer table rule. I placed the entries shown in Listing 1 in the /etc/mail/sendmail.cf file:

Listing 1. Entries for the sendmail.cf file
Kmailertable hash /etc/mail/mailertable.db
# not local -- try mailer table lookup
R$* <@ $+ > $*          $: < $2 > $1 < @ $2 > $3        extract host name
R< $+ . > $*            $: < $1 > $2                    strip trailing dot
R< $+ > $*              $: < $(mailertable $1 $) > $2   lookup
R< $~[ : $* > $*        $>MailerToTriple < $1 : $2 > $3         check -- resolved?
R< $+ > $*              $: $>Mailertable <$1> $2                try domain
# End of mailer table rules

A mailer table in Sendmail can be used to override routing for particular domains, which are not local host names.

Next, I created a new /etc/mail/mailertable file. This text file contained the name of the domain for which mail would be forwarded and the name of the SMTP server that would receive the mail.

notus.com.au	esmtp:[notus.com.au]

Mail to the domain notus.com.au would be forwarded to the specific SMTP host notus.com.au. The square brackets ([ ]) instructed Sendmail to ignore MX record lookups for notus.com.au and prevent "mail loops back to self" errors for this non-internet-connected and non-DNS resolvable host.

I then had to create the mailertable database (mailertable.db) using the mailertable text file I created earlier. This was accomplished with the makemap utility:

# cd /etc/mail
# makemap hash /etc/mail/mailertable  < mailertable
# ls mailertable.db
mailertable.db

I also needed to add the NotUs server into my local /etc/hosts file.

10.1.1.20	notus.com.au

Sendmail needed to be able to resolve the hostname, and this server was outside of my DNS.

After making these changes, I refreshed the Sendmail daemon (refresh –s sendmail). To verify that the mailertable entry was correct and that mail would be delivered to the correct host, I ran the following command:

$ sendmail -bv user@notus.com.au
user@notus.com.au... deliverable: mailer esmtp, host [notus.com.au], 
user user@notus.com.au

The –bv flag will start Sendmail with a request to verify the user IDs provided in the Address parameter field of the command. The sendmail command will respond with a message advising which IDs can be resolved to a mailer command. It does not try to deliver the mail. You can use this mode to validate the format of user IDs, aliases, or mailing lists.

From the previous output I was able to confirm that Sendmail would redirect all mail, for any user, bound for notus.com.au to the SMTP host notus.com.au.

Reviewing the mail activity in the Sendmail log (/var/log/maillog) also confirmed that this was indeed the case.

        Dec 18 12:34:54 aixmta01 sendmail[16724]: hBI1Yr315494: 
        to=<admin@notus.com.au>, delay=00:00:01, xdelay=00:00:01, mailer=esmtp, 
        pri=120998, relay=notus.com.au. [10.1.1.20], dsn=2.0.0, stat=Sent (OK)

A simple yet effective solution. It only took a few minutes to configure and test. It also cost nothing but my time to set it up.


Sendmail trick 2

The second request also involved forwarding mail to a specific server. However, the server that would receive the mail did not have an SMTP port listening on port 25. It had its own special port for accepting mail. Users would send a report via e-mail to an SAP system, which would then process the report. The SAP system (sapaix01) had its own SMTP server listening on port 25250. Mail had to be delivered to SAP on that port.

For some reason, the Exchange SMTP relay server was not able to establish a connection to sapaix01 on port 25250. It had to be listening on port 25. Otherwise, the messages would remain on the Exchange server mail queue as "destination unreachable." The messaging team never resolved this problem. It was up to Sendmail to save the day!

The messaging team requested the following (see Figure 2):

  1. Users will send e-mail reports to SAPRPT@xyz.com.au.
  2. Exchange would route the e-mail to SAPRPT@aixmta01, the AIX Sendmail server.
  3. The Sendmail server then routes the e-mail to SAPRPT@sapaix1.xyz.com.au on port 25250. The e-mail report is then automatically processed by SAP.
Figure 2. Mail flow from desktop, through Sendmail server, to SAP ICM SMTP server on port 25250
Flowchart showing process, beginning with users mail client and ending with SAP server.

Rather than use the SAP system's actual hostname (sapaix01), I created a DNS alias named icm01. This pointed to the actual IP address of the SAP server. This helped to clearly identify traffic (in the logs) destined for the SAP systems "Internet Communication Manager" (ICM) SMTP server. I also placed entries in the /etc/hosts files for the ICM DNS alias.

# grep -p icm /etc/hosts
10.1.1.22  icm01.xyz.com.au

Again, I could use the Sendmail mailertable entry here, but I also needed a way to handle the unusual SMTP port.

I created a new mailer definition in the /etc/mail/mailertable file and updated the mailertable database, just as I did before, with the makemap utility.

# grep 25250 /etc/mail/mailertable        
icm01.xyz.com.au esmtp25250:[sapaix01.xyz.com.au]

This specified that mail destined for icm01.xyz.com.au would be redirected to SMTP host sapaix01.xyz.com.au via esmtp25250.

In the /etc/mail/sendmail.cf file I created a new entry that mapped a new SMTP port identity named esmtp25250. This Mesmtp entry specified that if esmtp25250 was called from the mailertable definition, then the associated port would be used when delivering the mail, that is, sapaix01.xyz.com.au:25250.

# grep 25250 /etc/mail/sendmail.cf
Mesmtp25250,    P=[IPC], F=mDFMuXa, S=EnvFromSMTP/HdrFromSMTP, 
R=EnvToSMTP/HdrFromSMTP, E=\r\n, L=990,
A=TCP $h 25250

There was also an entry in the /etc/mail/aliases file that instructed Sendmail to send any mail for the "user" SAPRPT to the icm01.xyz.com.au host.

# grep –p SAPRPT /etc/mail/aliases
SAPRPT: @icm01.xyz.com.au

To verify that the mailertable and aliases would direct mail to the correct user, host, and port, I ran the sendmail command with the -bv flag:

# sendmail -bv SAPRPT
SAPRPT@icm01.xyz.com.au... deliverable: mailer esmtp25250, host 
[sapaix01.xyz.com.au], user SAPRPT@icm01.xyz.com.au

This confirmed that mail sent to SAPRPT@icm01.xyz.com.au would be redirected to sapaix01.xyz.com.au on SMTP port 25250. Sendmail activity, in /var/log/maillog, also confirmed that mail was being successfully delivered to sapaix01 on port 25250.

Aug  9 20:02:59 aixmta01 mail:info sendmail[299822]: k79K2xh299822:
from=<Chris.Gibson@xyz.com.au>, size=1384, class=0, nrcpts=1,
msgid=<E45223DDBB33774EA13C993829A75AA504B203E5@EXCHANGE.xyz.com.au>, 
proto=ESMTP, daemon=MTA, relay=exchange.xyz.com.au [10.1.1.24]
        
Aug  9 20:03:00 aixmta01 mail:info sendmail[68896]: k79K2xh299822: 
to=SAPRPT@icm01.xyz.com.au, delay=00:00:01, xdelay=00:00:01, 
mailer=esmtp25250, pri=31582, relay=sapaix01.xyz.com.au. [10.1.1.22], 
dsn=2.0.0, stat=Sent (OK)

Summary

I hope you found these tips interesting. Using Sendmail on AIX may be considered a thing of the past, with the all the available choices for mail servers on the market. However, Sendmail still has its uses. It can help you to get yourself or others out of a jam. Even if it is only a temporary solution to a problem.

Resources

Learn

Discuss

Comments

developerWorks: Sign in

Required fields are indicated with an asterisk (*).


Need an IBM ID?
Forgot your IBM ID?


Forgot your password?
Change your password

By clicking Submit, you agree to the developerWorks terms of use.

 


The first time you sign into developerWorks, a profile is created for you. Information in your profile (your name, country/region, and company name) is displayed to the public and will accompany any content you post, unless you opt to hide your company name. You may update your IBM account at any time.

All information submitted is secure.

Choose your display name



The first time you sign in to developerWorks, a profile is created for you, so you need to choose a display name. Your display name accompanies the content you post on developerWorks.

Please choose a display name between 3-31 characters. Your display name must be unique in the developerWorks community and should not be your email address for privacy reasons.

Required fields are indicated with an asterisk (*).

(Must be between 3 – 31 characters.)

By clicking Submit, you agree to the developerWorks terms of use.

 


All information submitted is secure.

Dig deeper into AIX and Unix on developerWorks


static.content.url=http://www.ibm.com/developerworks/js/artrating/
SITE_ID=1
Zone=AIX and UNIX
ArticleID=479840
ArticleTitle=Fun with Sendmail on AIX
publish-date=04062010